Omada controller

Omada controller

Omada controller
Omada controller
2024-10-05 10:05:08
Tags: #Controller
Model: OC200  
Hardware Version: V5
Firmware Version: 5.14.26.23

Hi,

 

I am still new to the Omada system i have an Omada Controller connected with 30 Access Point 

every 10 or 15 mines sometimes less all the networks disappear for several seconds and back again like the controller is restarting but it's not (I don't know how to explain the problem but that is the closest I can ). Does anyone have any idea where the problem

  0      
  0      
#1
Options
15 Reply
Re:Omada controller
2024-10-05 13:23:04

  @Amro__ 

 

The network?  More details?  Are the SSID's disappearing?  

 

Are you meshing the APs?

I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#2
Options
Re:Omada controller
2024-10-06 08:20:11

  @KimcheeGUN Yes all the SSID's disappearing for a few seconds. what do you mean by meshing the access points as I mentioned I am still new to the system? :(

  0  
  0  
#3
Options
Re:Omada controller
2024-10-06 13:16:22

  @Amro__ 

 

When you looking in the controller during this outage... does any of the AP show meshing while in the device list?

 

Sounds like you need to turn off meshing in the main settings page. 

I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#4
Options
Re:Omada controller
2024-10-06 13:28:07

  @KimcheeGUN Meshing is on, but if I turn it off I will  lose the concoction to the APs in the attached photo

 

  0  
  0  
#5
Options
Re:Omada controller
2024-10-06 13:31:36

  @Amro__ 

 

If you're not meshing any APs, then you wont have any issue.  

 

 

I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#6
Options
Re:Omada controller
2024-10-06 13:39:57
disabled, I will test it out and feed you back Many thanks for your time and support
  0  
  0  
#7
Options
Re:Omada controller
2024-10-07 07:29:20
still same problem after disable the meshing
  0  
  0  
#8
Options
Re:Omada controller
2024-10-07 08:08:31 - last edited 2024-10-07 08:09:06

https://drive.google.com/file/d/1VJ9VTsjYmeSpkcT2aaKqJo-aSPDiEl_V/view?usp=sharing

 

here is a video explaining exactly what is happening 1- no internet 2- The access point disappeared and the computer connected to the nearest one 3- back again to the access point and work again

  0  
  0  
#9
Options
Re:Omada controller
2024-10-08 08:39:33

  @Amro__ 

 

Is the network VIP the EAP broadcast?

From the video, it never disappeared, just lose Internet, but is still visible.

 

What's the model number of the EAP units you're using? What's their hardware version and firmware version?

  0  
  0  
#10
Options
Re:Omada controller
2024-10-09 08:11:08

  @Vincent-TP 

 

1- the first 4 Networks in the videos are EAP Broadcast including VIP Network

 

2- if you observed the signal was full and dropped that means the near access point SSID disappeared and the computer connected on the next AP

 

3- I have 2 types of AP EAP115 and EAP115-wall 

  0  
  0  
#11
Options