Manage Wired and Wireless Clients

Manage Wired and Wireless Clients

Manage Wired and Wireless Clients
Manage Wired and Wireless Clients
2024-09-28 05:32:33 - last edited 2024-09-28 05:36:55
Tags: #Logs
Model: OC200   ER605 (TL-R605)  
Hardware Version: V1
Firmware Version:

hello,
Request for help,
I have configured Vlan for computers working in the network
photo below

In addition, I have set up a WIFI network
photo below

 

nothing difficult, simple configuration. But I can't solve one problem. I don't know why computers working on wifi after work is finished (turned off) are displayed as if they were connected to wifi. The difference is that the computer that actually uses the wifi network is seen on the window as connected SSID ZSPRu..............
the computer is turned off so it is seen as connected to the network vlan
but it is physically turned off
photo below

why is this happening
Sorry for my English

  0      
  0      
#1
Options
3 Reply
Re:Manage Wired and Wireless Clients
2024-09-30 03:48:17

Hi  @Pablo_PL 

 

Controller status updates take time and may be delayed.

Will it still do this after waiting a while and refreshing?

  0  
  0  
#3
Options
Re:Manage Wired and Wireless Clients
2024-09-30 09:26:20

  @Pablo_PL 

It seems to me that it can do this for a few hours. The problem disappears for sure after restarting the router. I will try to analyze it more closely

  0  
  0  
#4
Options
Re:Manage Wired and Wireless Clients
2024-10-03 23:14:14

  @Pablo_PL 

 

My experience with the client list is that it shows all active DHCP leases.

In other words, a client that's been powered off will still show up in the client list until the DHCP lease it held expires.

If you release the lease, the client disappears from the list...

 

  0  
  0  
#5
Options