Background: 

 

This guide aims to provide insight into our VIGI NVR naming format.

 

This Article Applies to:

 

All TP-Link new VIGI NVR.

 

Naming Format:

 

Let's break it down:

 

VIGI NVR2016H-16MP

 

Model Number	Field	Example	Description
VIGI NVR2016H-16MP	NVR	Product Category	VIGI Network Video Recorder
	2 (First Number)	2 HDD	Number of Hard Disks 1   -    Supports 1 hard disk 2   -    Supports 2 hard disks 4    -    Supports 4 hard disks 8    -    Supports 8 hard disks
	0 (Second Number)	0	Complementary bit, used to signal minor functional changes or upgrades, 0 is the start bit. 1: Support hard disk quick install and quick remove function
	16 (Third and Fourth Number)	16 Channel	Channel capacity indicator 08   -    Supports 8 channels 16   -    Supports 16 channels 32   -    Supports 32 channels 48   -    Supports 48 channels 64   -    Supports 64 channels 96   -    Supports 96 channels
	H (First Letter)	H.264	Coding method indicator H    -    H.265 compression Null   -    H.264 compression
	-16 (Feature Number)	16 Ports	Special function indicators (Number of Ports)
	MP (Feature Letter)	Medium PoE(Budget)	Special function indicators MP/HP     -    indicates different PoE power budgets. (?)P    -    PoE power supply, AI    -    AI function supported. Supports NVR end AI analysis W    -    Wi-Fi enabled

 

Note:

 

1. The content of this article is intended to provide only a preliminary understanding of the VIGI NVR models. This does not represent the sole naming format in the future product roadmap. The author and TP-Link reserve the right to make changes to the contents of this article without prior notice. We reserve the right to modify the content at any time, without further notification.

2. The listed information does NOT always guarantee that actual product performance will be identical as the article writes. The provided content is for informational purposes only. We are not obligated to inform you if there are any changes to product performance in future releases.

 

Update Log:

 

 

Sep 24th, 2024:

Release of this KB.

 

Recommended Threads:

 

Common Questions About the Hardware Version and Firmware Update

TP-Link VIGI Surveillance Naming Format

VIGI Supported SNMP Nodes

 

Feedback:

 

• If this was helpful, welcome to give us Kudos by clicking the upward triangle below.
• If there is anything unclear in this solution post, please feel free to comment below.
• If you encounter such an issue, please follow the troubleshooting above to check your settings. Besides, ensure your Omada Controller and Gateway are running with the latest firmware.
• If the issue still exists after you try the suggestion above, please feel free to comment below or contact our support team with a detailed description of your issue and the steps you have tried.

 

Thank you in advance for your valuable feedback!

 

------------------------------------------------------------------------------------------------

Have other off-topic issues to report? 

Welcome to > Start a New Thread < and elaborate on the issue for assistance.