ER707-M2 v1.0 extremely inconsistent connections

ER707-M2 v1.0 extremely inconsistent connections

ER707-M2 v1.0 extremely inconsistent connections
ER707-M2 v1.0 extremely inconsistent connections
2024-09-16 01:22:56
Model: ER707-M2  
Hardware Version: V1
Firmware Version: 1.2.2

I have 6 Omada access points and a controller for a house and large yard.  Previously I used them with a 10+ year old Linksys router, but I recently got gigabit internet and was concerned that the router had not had security updates in years.  The old router worked great, but I was concerned about it and bought a ER707-M2 v1.0.

 

Unfortunately the ER707-M2 barely works as a router.  On any given Wifi connect attempt, its about 50% if it will actually route packets or simply drop all traffic to the device.  Hand off between APs frequently results in the same non-routing state.  As a result trying to move around my house disconnects me from the internet. This is not due to the Omada access points, since in the non-routing state if I disconnect from an AP and then reconnect back to the same AP it'll usually start working.  I just tried it now and was connected to a specific AP with strong signal but unable to connect to even local lan devices (e.g. Omada controller was not routed to).  Disconnected wifi and reconnect to the same AP and now Omada controller is accessible and I am getting 400 Mbit/s both ways.  Clearly the AP is working.  

 

Swapping back to the old router completely resolves the issue, but I'd like to be able to use the ER707-M2 rather than send it back.  I've tried every setting I can think of but nothing seems to make a difference.  Is there anything I can do to troubleshoot this?

  0      
  0      
#1
Options
4 Reply
Re:ER707-M2 v1.0 extremely inconsistent connections
2024-09-17 11:15:24

  @saratoga 

 

Interesting.  So you are running your devices in standalone, and presumably have an unmanaged L2 switch between the router and APs?  Have you configured any VLANs, say for your SSIDs?

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:ER707-M2 v1.0 extremely inconsistent connections
2024-09-18 02:10:57

Hi @saratoga 

Thanks for posting in our business forum.

saratoga wrote

I have 6 Omada access points and a controller for a house and large yard.  Previously I used them with a 10+ year old Linksys router, but I recently got gigabit internet and was concerned that the router had not had security updates in years.  The old router worked great, but I was concerned about it and bought a ER707-M2 v1.0.

 

Unfortunately the ER707-M2 barely works as a router.  On any given Wifi connect attempt, its about 50% if it will actually route packets or simply drop all traffic to the device.  Hand off between APs frequently results in the same non-routing state.  As a result trying to move around my house disconnects me from the internet. This is not due to the Omada access points, since in the non-routing state if I disconnect from an AP and then reconnect back to the same AP it'll usually start working.

How do you know and verify that it is not an issue with the access point?

Regarding the 50% or more traffic dropped, how do you verify that? Screenshots?

Is the controller involved? Do you have roaming enabled?

 

saratoga wrote

 I just tried it now and was connected to a specific AP with strong signal but unable to connect to even local lan devices (e.g. Omada controller was not routed to).  Disconnected wifi and reconnect to the same AP and now Omada controller is accessible and I am getting 400 Mbit/s both ways.  Clearly the AP is working.  

 

Swapping back to the old router completely resolves the issue, but I'd like to be able to use the ER707-M2 rather than send it back.  I've tried every setting I can think of but nothing seems to make a difference.  Is there anything I can do to troubleshoot this?

Ping your default gateway, will it work? Use -t and see what's the loss? Screenshots required.

 

Troubleshooting Techniques for Laymen

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#3
Options
Re:ER707-M2 v1.0 extremely inconsistent connections
2024-10-08 03:48:41

Clive_A wrote

Hi @saratoga 

Thanks for posting in our business forum.

saratoga wrote

I have 6 Omada access points and a controller for a house and large yard.  Previously I used them with a 10+ year old Linksys router, but I recently got gigabit internet and was concerned that the router had not had security updates in years.  The old router worked great, but I was concerned about it and bought a ER707-M2 v1.0.

 

Unfortunately the ER707-M2 barely works as a router.  On any given Wifi connect attempt, its about 50% if it will actually route packets or simply drop all traffic to the device.  Hand off between APs frequently results in the same non-routing state.  As a result trying to move around my house disconnects me from the internet. This is not due to the Omada access points, since in the non-routing state if I disconnect from an AP and then reconnect back to the same AP it'll usually start working.

How do you know and verify that it is not an issue with the access point?

Regarding the 50% or more traffic dropped, how do you verify that? Screenshots?

Is the controller involved? Do you have roaming enabled?

 

saratoga wrote

 I just tried it now and was connected to a specific AP with strong signal but unable to connect to even local lan devices (e.g. Omada controller was not routed to).  Disconnected wifi and reconnect to the same AP and now Omada controller is accessible and I am getting 400 Mbit/s both ways.  Clearly the AP is working.  

 

Swapping back to the old router completely resolves the issue, but I'd like to be able to use the ER707-M2 rather than send it back.  I've tried every setting I can think of but nothing seems to make a difference.  Is there anything I can do to troubleshoot this?

Ping your default gateway, will it work? Use -t and see what's the loss? Screenshots required.

 

Troubleshooting Techniques for Laymen

  @Clive_A 

 

It's not 50% of packets dropped, it's a 50% chance that the router will choose to route to a WiFi connection at all. Half the time 100% of packets go through, half the time zero.  It gives the IP and then just black holes the client.

 

What's bizzare is that wires continues working. I just tried doing tailscale on my 5g phone to my omada controller and that works great. Disconnect and reconnect a few times and eventually the WiFi will start working too.

 

It could be a problem with the access points but it goes away if I remove the ER707-M2 so it's somehow related to it. Additionally I can see my device in omada connected to the AP and traffic increasing while I'm connected, so the AP is sending/receiving data.

 

I can get you a picture of ping saying 100% packet loss if that helps.

  0  
  0  
#4
Options
Re:ER707-M2 v1.0 extremely inconsistent connections
2024-10-08 03:51:42
I have an omada switch as well although I'm not using VLANs yet. I want to but I need to get my internet working reliably with Omada hardware first. Is there any config info I can share that would help?
  0  
  0  
#5
Options