How to change HTTP Port for Controller Management

2024-09-05 07:25:12

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-05

How to change HTTP Port for Controller Management

2024-09-05 07:25:12

Model: Omada Software Controller (Linux)

Hardware Version:

Firmware Version:

我在debian下运行Controller。安装文件：Omada_SDN_Controller_v5.14.26.1_linux_x64.tar.gz

在我尝试System Settings修改HTTPS Port for Controller Management、HTTP Port for Controller Management时收到报错信息：The HTTPS port conflicts with an existing port.

这只在我将HTTPS修改为443、HTTP修改为80时出现，使用其他端口无此问题。

提示信息如下图：

尝试将443修改为1024、8080等都可以收到成功提示。

查看了本地端口确定没有端口占用情况。

请问应该如何设置、如何排查。

1 Reply

2024-09-06 07:42:23

Posts: 3673

Helpful: 719

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:How to change HTTP Port for Controller Management

2024-09-06 07:42:23

Note that if you are using Omada Controller on Linux, avoid using port 443, because non-root users are not allowed to run services on this port, which will cause the controller to fail to start. If you have encountered the issue, please refer to What to Do If the Omada Software Controller Fails to Start on Linux After Modifying the Port ( Controller 5.5.6 or Above).