SNMP ifDescr only works without Omada Controller
Current situation:
After Editing a "Port Name" using the Omada Controller Web-UI, the new Value is only shown in the Omada Controller UI. It is currently not updated to the corresponding SNMP OID, such as IF-MIB::ifDescr.49153 (.1.3.6.1.2.1.2.2.1.2.49153). The Value always reads STRING: gigabitEthernet 1/0/1, ignoring the edited "Port Name".
Expectation:
I would expect the SNMP OID Value to change after editing the "Port Name" with the Omada Controller GUI.
Example:
When the switch is not adopted and managed only "stand alone" (without Omada Controllers) this works perfectly as expected: editing the port name using the switch's Web-UI does change the OID value.
Request:
Please change the SNMP value of the corresponding SNMP OID on the device (switch) itself when editing a port name using the Omada Controller UI.
