Home

Forums

Stories

Knowledge Base

Business Community > Routers > ER605 : How to create static rooting setting between "192.168.0.100" and "10.0.0.40" ?

< Routers

ER605 : How to create static rooting setting between "192.168.0.100" and "10.0.0.40" ?

ER605 : How to create static rooting setting between "192.168.0.100" and "10.0.0.40" ?

ER605 : How to create static rooting setting between "192.168.0.100" and "10.0.0.40" ?

2024-08-26 09:06:11 - last edited 2024-08-26 09:09:40

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-08-26

ER605 : How to create static rooting setting between "192.168.0.100" and "10.0.0.40" ?

2024-08-26 09:06:11 - last edited 2024-08-26 09:09:40

Model: ER605 (TL-R605)

Hardware Version: V2

Firmware Version: 2.1.2 Build 20230210 Rel.62992

I appreciate your continued assistance.

I am trying to create rooting setting between "192.168.0.100" and "10.0.0.40".

Below enviroment, I am trying to connect, but I could not.

Device1

- IP address : 192.168.0.100

- Subnet mask : 255.255.255.0

- Default G.W : 192.168.0.1

- System : Windows 11 Pro-Ed

Device2

- IP address : 10.0.0.40

- Subnet mask : 255.255.255.0

- Default G.W : 10.0.0.1

- System : Non-OS System (Programmed on micro controler)

I tried setting bellow:

- Network - LAN - Network List

- Network - LAN - VLAN

- Transmission - Routing - Static Route

- Firewall - Access Control List (c.f. https://www.tp-link.com/jp/support/faq/3061/)

Please excuse my poor English, I would be grateful for your advice.

0

0

#1

3 Reply

2024-08-27 00:59:34

Posts: 5948

Helpful: 2914

Solutions: 1355

Stories: 0

Registered: 2023-06-09

Re:ER605 : How to create static rooting setting between "192.168.0.100" and "10.0.0.40" ?

2024-08-27 00:59:34

Thanks for posting in our business forum.

You can use this link for a reference of static routing configuration.

ER605(UN)_V2_User Guide

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

2

2

#2

LV1

2024-08-27 04:06:48

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-08-26

Re:ER605 : How to create static rooting setting between "192.168.0.100" and "10.0.0.40" ?

2024-08-27 04:06:48

Thanks for replying in my post.

However, I tried this roating configuration but it did not work.

I will paste which I tried setting:

Network > LAN > LAN > Network List

Network > VLAN > VLAN > VLAN List

Transmission > Routing > Routing Table

Firewall > Acces Control

↑

Is there wrong setting ?

I would be grateful for your advice.

0

0

#3

2024-08-27 08:47:15

Posts: 5948

Helpful: 2914

Solutions: 1355

Stories: 0

Registered: 2023-06-09

Re:ER605 : How to create static rooting setting between "192.168.0.100" and "10.0.0.40" ?

2024-08-27 08:47:15

Thanks for posting in our business forum.

Tanaka_T wrote

@Clive_A

Thanks for replying in my post.

However, I tried this roating configuration but it did not work.

I will paste which I tried setting:

Network > LAN > LAN > Network List

Network > VLAN > VLAN > VLAN List

Transmission > Routing > Routing Table

Firewall > Acces Control

↑

Is there wrong setting ?

I would be grateful for your advice.

What do you hope to achieve?

I mean, ACL is not needed. The VLAN interfaces you've created are accessible to each other. You simply want to force the 192.168.0.100 to route all its traffic to 10.0.0.40?

That should be done by static routing. I don't see your configuration picture. The next hop should be the 10.0.0.40. Because you want it to route to the 10.0.0.40.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

2

2

#4