eap 245(v3) is unable to provide ip/connection to vlan user along with eap 110(v4)
hi tp link as after a long time i am facing a problem with my eap 245 v3 with f.v. 5.0.7 so what is happening here i am having 3 eap110 v4 f.v.5.0.4 and one eap 245 and having 2vlans all vlans are working fine with eap110 but when the same users/devices are comming under eap245, they are not getting connection through it. all are in warrenty period so is it possible to get replacement of the eap245 v3 to v4. so that problem can be resolved.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Dipak-OMF
Just notice that the EAP245 is not with the latest firmware. Please update it to version 5.1.0 to have a try.
If the issue persists, let's go to the support ticket. The ID is TKID240966691.
- Copy Link
- Report Inappropriate Content
Hi @Dipak-OMF
Is the VLAN configuration for EAP245 and EAP110 the same? Are the both managed by Omada controller?
EAP245 has 5G band while EAP110 not, you may pay attention if the users are connecting from 2.4G(EAP110) to 5G(EAP245), or you can share us some screenshots of the SSID and VLAN settings of your controller.
- Copy Link
- Report Inappropriate Content
yes both are controlled by omada oc 200 and 5G band is disabled under vlan(guest) network.
I tried all options by disabling and enabling vlans to the eap245 but not getting sucess and one network which is working under all AP at everywhere at any band that is whitout vlan one for your reference I have sent attachment in reply mail.
- Copy Link
- Report Inappropriate Content
@Vincent-TP can i get any soln for this
- Copy Link
- Report Inappropriate Content
Hi @Dipak-OMF
Sorry for the late reply. Is the issue fixed? Or you contacted TP-Link technical support for help?
- Copy Link
- Report Inappropriate Content
@Vincent-TP I was waiting for your reply and then showed them the issues over remote support and they have taken configuration fils,logs, etc but still there is no update on this yet please try to understand it is very defficult to manage the issue.
- Copy Link
- Report Inappropriate Content
Hi @Dipak-OMF
Please give me the case ID so I can know the progress of the case. It normally begins with TKID.
- Copy Link
- Report Inappropriate Content
@Vincent-TP as i tried to ask about details for my case id then they told me this case is under layer 2 team and they are unable to provide the exact details but i requested them for case no and the case no is 240916681155.
- Copy Link
- Report Inappropriate Content
@Vincent-TP could you pls help me on this
- Copy Link
- Report Inappropriate Content
Hi @Dipak-OMF
Just notice that the EAP245 is not with the latest firmware. Please update it to version 5.1.0 to have a try.
If the issue persists, let's go to the support ticket. The ID is TKID240966691.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 369
Replies: 9
Voters 0
No one has voted for it yet.