Home

Forums

Stories

Knowledge Base

Business Community > Routers > Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN

< Routers

Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN

YuriyB

2024-08-15 13:59:54 - last edited 2024-08-16 02:15:45

Posts: 85

Helpful: 14

Solutions: 3

Stories: 0

Registered: 2024-07-23

Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN

2024-08-15 13:59:54 - last edited 2024-08-16 02:15:45

Tags: #WAN Setup

Model: ER605 (TL-R605)

Hardware Version: V2

Firmware Version: 2.2.6 Build 20240718 Rel.82712

I have two WAN interfaces. and my new ER605 ALWAYS use backup WAN (100mbs) as Primary WAN and my Primary WAN (1000gbps) is not used it is resting all the time

Whats happening? Load balance disabled. all outgoing traffic goes through backup WAN. speedtest and my ip shows backup isp

1 Accepted Solution

Clive_A

2024-08-16 02:15:42 - last edited 2024-08-16 02:15:45

Posts: 5628

Helpful: 2696

Solutions: 1268

Stories: 0

Registered: 2023-06-09

Re:Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN-Solution

2024-08-16 02:15:42 - last edited 2024-08-16 02:15:45

Hi @YuriyB

Thanks for posting in our business forum.

In the configuration guide, we have clearly instructed you to enable the load balancing if you need link backup. You did not enable it at all and of course, the system did not function properly.

https://www.tp-link.com/en/support/faq/2133/

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Recommended Solution

3 Reply

YuriyB

LV2

2024-08-15 14:11:00 - last edited 2024-08-16 01:19:21

Posts: 85

Helpful: 14

Solutions: 3

Stories: 0

Registered: 2024-07-23

Re:Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN

2024-08-15 14:11:00 - last edited 2024-08-16 01:19:21

my two PPTP Clients are using WAN (Primary) and connections established i can see it on server side ( shows my PRIMARY WAN IP)

but all another traffic goes through backup WAN2

tp-link did u test it??

Clive_A

2024-08-16 02:15:42 - last edited 2024-08-16 02:15:45

Posts: 5628

Helpful: 2696

Solutions: 1268

Stories: 0

Registered: 2023-06-09

Re:Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN-Solution

2024-08-16 02:15:42 - last edited 2024-08-16 02:15:45

Hi @YuriyB

Thanks for posting in our business forum.

In the configuration guide, we have clearly instructed you to enable the load balancing if you need link backup. You did not enable it at all and of course, the system did not function properly.

https://www.tp-link.com/en/support/faq/2133/

Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN

Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN

Information

Voters 0

Tags