Configuration Guide How to Set Up QoS for Dante and Voice Protocols on Omada Switch
Configuration Guide How to Set Up QoS for Dante and Voice Protocols on Omada Switch
Background:
This post provides a configuration guide to set up QoS on Omada Switch for Dante and voice-related protocols.
This Article Applies to:
Omada switches with the QoS feature. L2+ and L3 Switches.
Configuration Steps:
We will separate them into 3 chapters for the priority of the services are different.
General settings:
To start, we need to configure some generic settings to work with the QoS.
1. When creating the VLAN for these AVoIP protocols, please enable IGMP snooping for it, go to Settings > Wired Networks > LAN, click Create New LAN to create a new VLAN for the use of AV protocols.
When creating this VLAN, please click the Enable box to enable IGMP Snooping and MLD Snooping.
2. After that, we need to configure drop unknown groups and fast leave for IGMP snooping as well as the QoS settings, which need to use CLI template to send commands to the switch. For how to use CLI template in Omada controller, please refer to the FAQ: CLI Configuration Guide for Omada SDN Controller (v5.9.9 and above). Next, we will briefly introduce what the commands need to do and list the example commands.
1. Configuration for AES67:
AES67 uses DSCP priority 34, 46 and 56, and they needed to be mapped to 4, 5 and 6 802.1p priority respectively, and for the TC-5 queue, its scheduler mode should be SP.
For TL-SG3452X , TL-SG3452XP , SG3428XPP-M2 , SG6654XHP , TL-SX3008F , TL-SX3016F , SG3428 , TL-SG3428X , SG3218XP-M2 , TL-SG3428XF, SG3452X , SG3210XHP-M2 V2, TL-SG3210XHP-M2 V2, SG3428XF , SG6428XHP , SX3008F , SG3428X , SX3016F , TL-SG3428X-UPS , SX6632YF , SG3452XP , TL-SG3428, SG6654X , SG6428X , TL-SG3428MP , TL-SG3452 , TL-SX3206HPP , SG3428XMP , TL-SG3428XMP , SX3206HPP, the commands are:
qos dscp-map 36 4
qos dscp-map 46 5
qos dscp-map 56 6
qos queue 5 mode sp
ip igmp snooping drop-unknown
interface range gigabitEthernet 1/0/1-5 (choose the uplink and downlink ports)
qos trust mode dscp
#
interface range gigabitEthernet 1/0/2-5 (choose the ports connected directly to clients)
ip igmp snooping immediate-leave
For TL-SG2008P , TL-SG2218P , TL-SG2016P , SG2210XMP-M2 , SG3428XPP-M2 , TL-SG2210P , SG2210MP , TL-SL2428P , SG2218 , TL-SG3452P , SG3218XP-M2 , SL2428P , TL-SG3428X-M2 , SG3210X-M2 , TL-SG2210MP , SG3428X-M2 , SG3210 , TL-SG3428XPP-M2 , SG3210XHP-M2 V3 , TL-SG3210XHP-M2 V3, SG2008 , TL-SG2428P , SG2005P-PD , SG2428LP , SG2218P , SG2428P , SG2008P , TL-SG2218 , SG6654X , SG2016P , TL-SG2008 , TL-SG3210 , TL-SG3452 , TL-SG3452P, the commands are:
qos dscp-map 36 4
qos dscp-map 46 5
qos dscp-map 56 6
ip igmp snooping drop-unknown
interface range gigabitEthernet 1/0/1-5 (choose the uplink and downlink ports)
qos trust mode dscp
qos queue 5 mode sp
#
interface range gigabitEthernet 1/0/2-5 (choose the ports connected directly to clients)
ip igmp snooping immediate-leave
2. Configuration for Dante
Dante uses DSCP priority 8, 46, 48, and 56, and they needed to be mapped to 2, 5, 5 and 6 802.1p priority respectively, and for the TC-5 and TC-6 queue, their scheduler mode should be SP.
For TL-SG3452X , TL-SG3452XP , SG3428XPP-M2 , SG6654XHP , TL-SX3008F , TL-SX3016F , SG3428 , TL-SG3428X , SG3218XP-M2 , TL-SG3428XF, SG3452X , SG3210XHP-M2 V2, TL-SG3210XHP-M2 V2, SG3428XF , SG6428XHP , SX3008F , SG3428X , SX3016F , TL-SG3428X-UPS , SX6632YF , SG3452XP , TL-SG3428, SG6654X , SG6428X , TL-SG3428MP , TL-SG3452 , TL-SX3206HPP , SG3428XMP , TL-SG3428XMP , SX3206HPP, the commands are:
qos dscp-map 8 2
qos dscp-map 46 5
qos dscp-map 48 5
qos dscp-map 56 6
qos queue 5 mode sp
qos queue 6 mode sp
ip igmp snooping drop-unknown
interface range gigabitEthernet 1/0/1-5 (choose the uplink and downlink ports)
qos trust mode dscp
#
interface range gigabitEthernet 1/0/2-5 (choose the ports connected directly to clients)
ip igmp snooping immediate-leave
For TL-SG2008P , TL-SG2218P , TL-SG2016P , SG2210XMP-M2 , SG3428XPP-M2 , TL-SG2210P , SG2210MP , TL-SL2428P , SG2218 , TL-SG3452P , SG3218XP-M2 , SL2428P , TL-SG3428X-M2 , SG3210X-M2 , TL-SG2210MP , SG3428X-M2 , SG3210 , TL-SG3428XPP-M2 , SG3210XHP-M2 V3 , TL-SG3210XHP-M2 V3, SG2008 , TL-SG2428P , SG2005P-PD , SG2428LP , SG2218P , SG2428P , SG2008P , TL-SG2218 , SG6654X , SG2016P , TL-SG2008 , TL-SG3210 , TL-SG3452 , TL-SG3452P, the commands are:
qos dscp-map 8 2
qos dscp-map 46 5
qos dscp-map 48 5
qos dscp-map 56 6
ip igmp snooping drop-unknown
interface range gigabitEthernet 1/0/1-5 (choose the uplink and downlink ports)
qos trust mode dscp
qos queue 5 mode sp
qos queue 6 mode sp
#
interface range gigabitEthernet 1/0/2-5 (choose the ports connected directly to clients)
ip igmp snooping immediate-leave
3. Configuration for Q-SYS
Dante uses DSCP priority 26, 34 and 46, and they needed to be mapped to 3, 4 and 5 802.1p priority respectively, and for the TC-4 and TC-5 queue, their scheduler mode should be SP.
For TL-SG3452X , TL-SG3452XP , SG3428XPP-M2 , SG6654XHP , TL-SX3008F , TL-SX3016F , SG3428 , TL-SG3428X , SG3218XP-M2 , TL-SG3428XF, SG3452X , SG3210XHP-M2 V2, TL-SG3210XHP-M2 V2, SG3428XF , SG6428XHP , SX3008F , SG3428X , SX3016F , TL-SG3428X-UPS , SX6632YF , SG3452XP , TL-SG3428, SG6654X , SG6428X , TL-SG3428MP , TL-SG3452 , TL-SX3206HPP , SG3428XMP , TL-SG3428XMP , SX3206HPP, the commands are:
qos dscp-map 26 3
qos dscp-map 34 4
qos dscp-map 46 5
qos queue 4 mode sp
qos queue 5 mode sp
ip igmp snooping drop-unknown
interface range gigabitEthernet 1/0/1-5 (choose the uplink and downlink ports)
qos trust mode dscp
#
interface range gigabitEthernet 1/0/2-5 (choose the ports connected directly to clients)
ip igmp snooping immediate-leave
For TL-SG2008P , TL-SG2218P , TL-SG2016P , SG2210XMP-M2 , SG3428XPP-M2 , TL-SG2210P , SG2210MP , TL-SL2428P , SG2218 , TL-SG3452P , SG3218XP-M2 , SL2428P , TL-SG3428X-M2 , SG3210X-M2 , TL-SG2210MP , SG3428X-M2 , SG3210 , TL-SG3428XPP-M2 , SG3210XHP-M2 V3 , TL-SG3210XHP-M2 V3, SG2008 , TL-SG2428P , SG2005P-PD , SG2428LP , SG2218P , SG2428P , SG2008P , TL-SG2218 , SG6654X , SG2016P , TL-SG2008 , TL-SG3210 , TL-SG3452 , TL-SG3452P, the commands are:
qos dscp-map 26 3
qos dscp-map 34 4
qos dscp-map 46 5
ip igmp snooping drop-unknown
interface range gigabitEthernet 1/0/1-5 (choose the uplink and downlink ports)
qos trust mode dscp
qos queue 4 mode sp
qos queue 5 mode sp
#
interface range gigabitEthernet 1/0/2-5 (choose the ports connected directly to clients)
ip igmp snooping immediate-leave
Update Log:
Jul 23rd, 2024:
Release of this guide.
Recommended Threads:
How to Set Up Switch as DHCP Server on Omada SDN Controller
How to Set Up VLAN Interface on the Omada Router
Howto - A Guide to Use Forum Effectively. Read Before You Post.
Feedback:
- If this was helpful, welcome to give us Kudos by clicking the upward triangle below.
- If there is anything unclear in this solution post, please feel free to comment below.
Thank you in advance for your valuable feedback!
------------------------------------------------------------------------------------------------
Have other off-topic issues to report?
Welcome to > Start a New Thread < and elaborate on the issue for assistance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I did get it working partly thanks to @MichielD.
I have set all ports to QoS trust mode DSCP.
At first I did have problems with Multiple clock leaders aswell, but this does not have anything to do with QoS.
- Try removing "ip igmp snooping drop-unknown" everywhere.
- "immediate-leave" or Fast-Leave I've tested with and saw no difference in my environment which admit admiddately isn't that big. (I'm running Dante without it)
- Set up 1 switch as the IGMP querier (this is missing from this tutorial).
Kind regards,
Wes
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 3291
Replies: 11
Voters 0
No one has voted for it yet.