connected devices not showing up in client list
Have a TL-R605 v1.0 router and T1600G-52PS v4.0 switch that are directly connected to the devices that are not sowing up.
I have a CPE510(a) that is connected to the T1600G-52PS v4.0 switch not showing connected anywhere in the client list, there is another CPE510(b) connected on the wireless side of the CPE510(a) the clients tha t are connected to a SG2008P v3.20 switch on the wireless side are showing the clients connected.
Why is the CPE510 devices not showing up
Thanks you any help
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I am confused. Could you please draw a diagram of your network and point out the problem for me? Do you assign a static IP address to the CPE unit? If it has a static IP, it will not appear on the client list.
- Copy Link
- Report Inappropriate Content
yes those 2 devices are static, that should not stop it from showing up in the client list, other devices such as cameras that are on a static is showing in the client list(cameras are on a different IP range)
I have access to other brand systems that show static devices in the client list did not think they omitted them here.
I think they should have them listed or at least allow you to have access a reservations list
- Copy Link
- Report Inappropriate Content
To see if they can appear on the client list, you can attempt to connect the CPE(a) directly to the TL-SG2008P controlled by the controller and let it obtain an IP address from the router without setting it as static.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 246
Replies: 3
Voters 0
No one has voted for it yet.