Can't Access Router Page Over WiFi
Hi
My network connection as follows...
2 ISP Routers>2 Cables>TP-Link Load Balance>1Cable>NSM2 AP Mode>WiFi>My Pc
ISP Router 192.168.1.1
TP-Link LB 192.168.0.1
I can't access the configuration page of the ISP Router 192.168.1.1 or TP-Link LB 192.168.0.1 over Wi-Fi, it gives me a white blank page trying to open but can't.
But when I connect my pc by cable to ISP Router 192.168.1.1 or TP-Link LB 192.168.0.1 Lan port, the page opens smoothly.
For note, I have changed NSM2 AP by LG U+ DD-WRT software Act as AP, it's worked fine.
Now how to make the connection pass through NSM2 to open the router or load balance configuration page???
Thank
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @lmpzkt
lmpzkt wrote
NAM2 is Nano Station M2 device
LB is Load Balance
AP Access point
The problem is that i can't open nether load balance nor the vdsl router configuration page over wifi, only can do this by cable connected to the load balance lan port.
Hope you can help me
Thanks
I know the abbreviations but not your question. That's why I asked.
Now, if they're connected properly, you should at least access one of the routers page.
If you are in the LAN of the TP router, you should get an IP from it and access it in the same LAN. If you don't, you should examine your network diagram and see if they are under the same subnet.
For the router placed on the WAN of the other routers, it's accessible as well if you make sure it's configured to be available for other IPs. Some kind of firewalls may stop the access so that is something you should take a look.
- Copy Link
- Report Inappropriate Content
Hi @lmpzkt
Thanks for posting in our business forum.
Sorry that I don't understand what's been described.
- Copy Link
- Report Inappropriate Content
NAM2 is Nano Station M2 device
LB is Load Balance
AP Access point
The problem is that i can't open nether load balance nor the vdsl router configuration page over wifi, only can do this by cable connected to the load balance lan port.
Hope you can help me
Thanks
- Copy Link
- Report Inappropriate Content
Hi @lmpzkt
lmpzkt wrote
NAM2 is Nano Station M2 device
LB is Load Balance
AP Access point
The problem is that i can't open nether load balance nor the vdsl router configuration page over wifi, only can do this by cable connected to the load balance lan port.
Hope you can help me
Thanks
I know the abbreviations but not your question. That's why I asked.
Now, if they're connected properly, you should at least access one of the routers page.
If you are in the LAN of the TP router, you should get an IP from it and access it in the same LAN. If you don't, you should examine your network diagram and see if they are under the same subnet.
For the router placed on the WAN of the other routers, it's accessible as well if you make sure it's configured to be available for other IPs. Some kind of firewalls may stop the access so that is something you should take a look.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 258
Replies: 3
Voters 0
No one has voted for it yet.