Business Community > Controllers > How to adopt remote router
< Controllers

How to adopt remote router

How to adopt remote router

How to adopt remote router
How to adopt remote router
2024-06-26 18:37:53
Model: OC300  
Hardware Version:
Firmware Version: 1.22.4 Build 20240304 Rel.59252

Hi,

 

I am new.

 

I have an OC300, joined to Omada Cloud. I can access my controller just fine via Omada cloud. I have a client in a different country (I have remote access to their computers) - I logged into their ER605 to join it to my controller. It needs an Inform URL.. Where do I find this?

 

I want to be able to manage remote routers/switches/eap's from my central controller in the UK. Customer is currently in Portugul.Obviosuly, the cusotmer ha sourchased the router in their country so it will never be and has not been on the local network with my controller.

 

Port Forwaring/NAT is no issue if I need to open ports.

 

With Unifi, I could have a device anywhere in the world and manage it via my On-Premise controller - this is my aim with my OC300.

 

 

Thanks a million.

 

 

  0      
 
  0      
 
#1
Options
6 Reply
Re:How to adopt remote router
2024-06-27 06:04:25 - last edited 2024-06-27 06:06:58

  @JacksonSystems 

 

you need to port forward these ports into the controller
UDP 29810
TCP 29811-29816
inform url is the ip on the firewall where the controller is.

 

  1  
  1  
#2
Options
Re:How to adopt remote router
2024-06-27 08:55:52

  @JacksonSystems 

Please follow this guide to set it up.

How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above)

 

Please open those ports for the controller.The ports set in the article are not for the latest controller.
UDP 29810, TCP 29811-29816
 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#3
Options
Re:How to adopt remote router
2024-06-27 09:31:20 - last edited 2024-06-27 09:31:32

Thanks for the replies guys.

 

Just one more thing, If I adopt A Device onsite with the controller.. and then take that device offsite - I presume I'll need to change the inform URL

?

 

Thanks

  0  
  0  
#4
Options
Re:How to adopt remote router
2024-06-27 09:44:22

  @JacksonSystems 

Has the Omada controller's IP address changed? If not, there is no need to update the infrom URL; the inform URL allows the controller to locate the router.
 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options
Re:How to adopt remote router
2024-06-27 09:48:15
I get that, BUT I presume ill have to have A DNS address rather than IP set for inform address, so when I take a device to a remote location, even in a different country to where the controller is located, the DNS address will resolve and still reach the controller.
  0  
  0  
#6
Options
Re:How to adopt remote router
2024-06-27 12:07:34

  @JacksonSystems 

 

yes, it is fine to use the dns address, I use this myself on a setup with dynamic IP where the controller is.

 

 

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 502

Replies: 6

Related Articles
Adopt AP to a Remote Controller?
3780 0
 Eap225 not adopt remote controller
1130 0
"Un-adopt" a router from OC-200?
1872 0
Trying to adopt omada router and AP from controller I am trying to host from and fails to adopt
1446 0
 Remote adoption process
318 0
HOW TO REMOTE ACCESS TO THE ROUTER FROM OTHER LOCATIONS
643 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.