Business Community > Routers > Missing Feature ER707-M2 Jumbo Frames
< Routers

Missing Feature ER707-M2 Jumbo Frames

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Missing Feature ER707-M2 Jumbo Frames

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Missing Feature ER707-M2 Jumbo Frames
Missing Feature ER707-M2 Jumbo Frames
2024-06-17 09:37:43 - last edited 2024-07-10 01:02:45
Model: ER707-M2  
Hardware Version: V1
Firmware Version: 1.2.2 Build 20240324 Rel.42799

Hi,

 

I only want to know if you have Jumbo frames on the agenda for future firmware upgrade? I need to know because I need it on 2 different VLAN's and the ER707 route between it.

 

Kind regards

 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Missing Feature ER707-M2 Jumbo Frames -Solution
2024-06-18 02:01:02 - last edited 2024-07-10 01:02:47

Hi @oro70 

Thanks for posting in our business forum.

LAN>LAN jumbo frame is supported.

WAN>LAN jumbo frame is not supported and not planned.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
Re:Missing Feature ER707-M2 Jumbo Frames -Solution
2024-07-10 01:02:35 - last edited 2024-07-10 01:02:45

Hi @oro70 
Thanks for posting in our business forum.

oro70 wrote

Hi @Clive_A I can't see the jumbo frame settings on LAN. I'm using the omada controller 5.13.30.8 on Docker. But for your info, I don't have a TP-Link Omada Switch connected. Could it be a reason why I don't have this settings? Kind regards

The path was referring to the standalone mode. For the controller adopted situation, it is not available.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#4
Options
3 Reply
Re:Missing Feature ER707-M2 Jumbo Frames -Solution
2024-06-18 02:01:02 - last edited 2024-07-10 01:02:47

Hi @oro70 

Thanks for posting in our business forum.

LAN>LAN jumbo frame is supported.

WAN>LAN jumbo frame is not supported and not planned.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
Re:Missing Feature ER707-M2 Jumbo Frames
2024-07-09 12:35:48 - last edited 2024-07-09 12:36:09

Hi @Clive_A I can't see the jumbo frame settings on LAN. I'm using the omada controller 5.13.30.8 on Docker. But for your info, I don't have a TP-Link Omada Switch connected. Could it be a reason why I don't have this settings? Kind regards

  0  
  0  
#3
Options
Re:Missing Feature ER707-M2 Jumbo Frames -Solution
2024-07-10 01:02:35 - last edited 2024-07-10 01:02:45

Hi @oro70 
Thanks for posting in our business forum.

oro70 wrote

Hi @Clive_A I can't see the jumbo frame settings on LAN. I'm using the omada controller 5.13.30.8 on Docker. But for your info, I don't have a TP-Link Omada Switch connected. Could it be a reason why I don't have this settings? Kind regards

The path was referring to the standalone mode. For the controller adopted situation, it is not available.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 474

Replies: 3

Related Articles
Er707-m2 CityFibre
2661 0
ER707-M2 Question
840 0
ER707-M2 -> Internet Wan Off-line. (HW-upgrade from ER605-V2 to ER707-M2)
1318 0
LAN port isolation on ER707-M2
642 0
Current status of IPv6 integration ER707-M2
726 0
ER707-M2 Displaying incorrect version number
1001 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.