NAT Loopback
Hello Everyone,
I have a problem related to connecting to a host on the LAN using an external address.
I have configured a web server in the LAN and forwarded port from WAN to the server.
When I connect to the server from outside the LAN it gets connected, but when I try to connect to the web server on LAN it does not get connected.
Jarek
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The router does support NAT loop back. For this problem, we thought it was related to the configuration. Can you show us how you configure port forwarding? Are you using WAN IP+ port number to access the web server inside the network? Or do you use domain?
- Copy Link
- Report Inappropriate Content
Is it possible to redirect an external DNS address to a local IP address? As it is with other manufacturers in the HOSTS section.
Only if I have external redirects to different ports on several devices then the static assignment in hosts will always redirect me to only one device.
The best solution would be a working loopback.
- Copy Link
- Report Inappropriate Content
Thank you so much for taking the time to post the issue on TP-Link community!
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID240632421, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 487
Replies: 3
Voters 0
No one has voted for it yet.