Tl-sg2216 buzzing
My partner died not long ago (he was the house techie) and I know nothing about our set up at home other than I have an old tl sg2216 which is buzzing. I don't know which hardware or firmware version it is either.
I'm assuming as it's buzzing it's developed a fault so my question is what do I do?
If it needs replacing what do I replace it with that's simple enough for an idiot like me?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Kerrytog
Thanks for posting in our business forum.
First, the buzzing sound may not come from the switch. It could be anything buzzing from a power outlet to the power adapter.
Could you confirm where the sound comes from? If you are certain it is coming from the switch, you can contact the support and express your request.
Second, buzzing does not mean it is bad or broken. You should still verify whether it is working or not. Please describe what you see from the front panel of the interface.
Third, if it is your power adapter buzzing or the connector on the switch, reconnect them or change a new power outlet/strip to try. It could be a loose cable.
If your expectation is to get an RMA, contact the technical support for further assistance and troubleshooting before they issue an approval.
Note that the fee to ship back the device is not covered, you should pay this shipping fee to send the unit back to us.
- Copy Link
- Report Inappropriate Content
Hi @Kerrytog
Thanks for posting in our business forum.
First, the buzzing sound may not come from the switch. It could be anything buzzing from a power outlet to the power adapter.
Could you confirm where the sound comes from? If you are certain it is coming from the switch, you can contact the support and express your request.
Second, buzzing does not mean it is bad or broken. You should still verify whether it is working or not. Please describe what you see from the front panel of the interface.
Third, if it is your power adapter buzzing or the connector on the switch, reconnect them or change a new power outlet/strip to try. It could be a loose cable.
If your expectation is to get an RMA, contact the technical support for further assistance and troubleshooting before they issue an approval.
Note that the fee to ship back the device is not covered, you should pay this shipping fee to send the unit back to us.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 307
Replies: 1
Voters 0
No one has voted for it yet.