ER7212PC VLan/Port separation ACLs

ER7212PC VLan/Port separation ACLs

ER7212PC VLan/Port separation ACLs
ER7212PC VLan/Port separation ACLs
2024-05-23 15:43:41
Model: ER7212PC  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20230901 Rel.55651

Is it at all possible, with the ER7212PC v.1, to setup three VLANs, each on its own physical port, while keeping them from accessing each other (ie. Ping), without using an additional switch? I was able to do this with the ER605 v1, but can't figure it out with the ER7212PC v1. Ports have been assigned to the correct PVID respectively and Bidirectional Deny ACLs have been created as Switch ACLs, but Pings keep going back and forth.

Network diagram

  0      
  0      
#1
Options
1 Reply
Re:ER7212PC VLan/Port separation ACLs
2024-05-24 02:21:25 - last edited 2024-05-24 02:21:47

Hi @Abdros 

Thanks for posting in our business forum.

The steps are the same like the ER605.

How to Set Up VLAN Interface on the Omada Router

 

Try out the guides we have: https://community.tp-link.com/en/business/forum/794?labelIds=8760

BTW, make sure your firmware is up-to-date.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#2
Options