Business Community > Routers > ER7212PC V1_1.2.0_Build 20240705 Beta for Omada Controller V5.14 (Updated on Jul 19th, 2024)
< Routers

Beta Software ER7212PC V1_1.2.0_Build 20240705 Beta for Omada Controller V5.14 (Updated on Jul 19th, 2024)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123

Beta Software ER7212PC V1_1.2.0_Build 20240705 Beta for Omada Controller V5.14 (Updated on Jul 19th, 2024)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
21 Reply
Re:ER7212PC V1_1.2.0_Build 20240517 Beta for Omada Controller V5.14 (Released on May 20th, 2024)
2024-05-23 20:09:29
Hi Steve! I managed to upgrade the firmware successfully. I'm still checking some issues with PPSK without Radius (i'm in touch with support), that I had with firmware 1.1.4 (users are now checking if the issue persists). I was really hoping that 5.14 will bring the embedded Radius Server (which I understand are available even in earlier versions) with Radius users (though understandably it would be with limited user base).
  0  
  0  
#12
Options
Re:ER7212PC V1_1.2.0_Build 20240517 Beta for Omada Controller V5.14 (Released on May 20th, 2024)
2024-05-24 01:27:55

Hi @GoodOmens 

Thanks for posting in our business forum.

GoodOmens wrote

  @Clive_A Correct ... The 30 LAN interface was working for all other devices on the network, some on a SG 2008 switch (THough those were tagged with the profile) and others through the WiFi APs (Via tagging the SSID). Going into the update I had the port (11 and 12) tagged at PVID 30 (all others as 1). After the update those were the only devices unreachable out of my 30+ devices (A mix of three LAN interfaces, 1, 20, 30). 

 

Between the update and noticing the device was unreachable I had performed a restore of settings from a backup that was done on ER7212PC 1.1.3 Build 20240403 and back to a config that was saved from V1_1.2.0_Build 20240517 (I had saved a backup just prior to restoring from the 1.1.3 version), so it was either the retoring the config backup or the update that caused the devices to be unreachable. As soon as I switched the PVID to 1 the device was reachable and it worked as expected when going back to the PVID 30 I wanted it on.

We cannot replicate the said issue. Can you please export the backup for us?

Will create a ticket for you. Please prepare your backup and login username and password.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#13
Options
Re:ER7212PC V1_1.2.0_Build 20240517 Beta for Omada Controller V5.14 (Released on May 20th, 2024)
2024-05-25 16:16:23

Hi @Clive_A!

 

Any plans to increase the number of adopted switches to more than 2? 10 would be great!

  2  
  2  
#14
Options
Re:ER7212PC V1_1.2.0_Build 20240517 Beta for Omada Controller V5.14 (Released on May 20th, 2024)
2024-05-29 12:50:16 - last edited 2024-05-29 12:57:25

  @Clive_A I am getting daily "[Failed]The controller failed to mail global logs to ********@gmail.com automatically."

 

SMTP is disabled under Server Settings (it's unchecked) ... is there another place to disable the emailing of logs? I can't find that setting anywhere.

 

"Alert emails" is checked under my user settings but the box is grayed out (I can't uncheck it) and it says to enable SMTP....

  0  
  0  
#15
Options
Re:ER7212PC V1_1.2.0_Build 20240517 Beta for Omada Controller V5.14 (Released on May 20th, 2024)
2024-05-30 00:43:26

Hi @GoodOmens 

Thanks for posting in our business forum.

GoodOmens wrote

  @Clive_A I am getting daily "[Failed]The controller failed to mail global logs to ********@gmail.com automatically."

 

SMTP is disabled under Server Settings (it's unchecked) ... is there another place to disable the emailing of logs? I can't find that setting anywhere.

 

"Alert emails" is checked under my user settings but the box is grayed out (I can't uncheck it) and it says to enable SMTP....

So, you've unchecked this one. Correct?
What about the Log > Notification > System? Do you uncheck these? Please paste a screenshot.

 

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#16
Options
Re:ER7212PC V1_1.2.0_Build 20240517 Beta for Omada Controller V5.14 (Released on May 20th, 2024)
2024-05-30 01:01:54 - last edited 2024-05-30 01:04:09

  @Clive_A That server setting shown in your SS was unchecked/ disabled at the time I was receiving the before mentioned errors.

 

 Log > Notification > System did have some email settings checked (That I have unchecked). I'll report back if I continue to receive the error. You'd think that having the mail server disabled would prevent it from trying to send emails.

 

I don't recall ever checking anything under notification->system.

  1  
  1  
#17
Options
Re:ER7212PC V1_1.2.0_Build 20240517 Beta for Omada Controller V5.14 (Released on May 20th, 2024)
2024-05-30 01:14:18

Hi @GoodOmens 

Thanks for posting in our business forum.

GoodOmens wrote

  @Clive_A That server setting shown in your SS was unchecked/ disabled at the time I was receiving the before mentioned errors.

 

 Log > Notification > System did have some email settings checked (That I have unchecked). I'll report back if I continue to receive the error. You'd think that having the mail server disabled would prevent it from trying to send emails.

 

I don't recall ever checking anything under notification->system.

Some settings are by default enabled with the new controller version. Esp the logs. In case people never take a look at those new added log recorders.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#18
Options
Re:ER7212PC V1_1.2.0_Build 20240517 Beta for Omada Controller V5.14 (Released on May 20th, 2024)
2024-05-31 01:19:32 - last edited 2024-05-31 01:20:16

Hi @GoodOmens 

Thanks for posting in our business forum.

GoodOmens wrote

  @Clive_A Correct ... The 30 LAN interface was working for all other devices on the network, some on a SG 2008 switch (THough those were tagged with the profile) and others through the WiFi APs (Via tagging the SSID). Going into the update I had the port (11 and 12) tagged at PVID 30 (all others as 1). After the update those were the only devices unreachable out of my 30+ devices (A mix of three LAN interfaces, 1, 20, 30). 

 

Between the update and noticing the device was unreachable I had performed a restore of settings from a backup that was done on ER7212PC 1.1.3 Build 20240403 and back to a config that was saved from V1_1.2.0_Build 20240517 (I had saved a backup just prior to restoring from the 1.1.3 version), so it was either the retoring the config backup or the update that caused the devices to be unreachable. As soon as I switched the PVID to 1 the device was reachable and it worked as expected when going back to the PVID 30 I wanted it on.

Well, we cannot reproduce what you reported.

Can you show me a network diagram of your network? I also request a backup of your config.

Please zip your diagram picture and the backup file in one zip. And use your registered email address as the password to unzip your compressed file. Share the file here or share a link. 

I also need a picture of how you configure the VLAN on the client end where you connect to PVID 30 port if you are connecting a switch or whatsoever.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#19
Options
Re:ER7212PC V1_1.2.0_Build 20240517 Beta for Omada Controller V5.14 (Released on May 20th, 2024)
2024-06-06 05:49:45

  @mimi234 I meant @Clive and not Steve - sorry for that!

mimi234 wrote

Hi Steve! I managed to upgrade the firmware successfully. I'm still checking some issues with PPSK without Radius (i'm in touch with support), that I had with firmware 1.1.4 (users are now checking if the issue persists). I was really hoping that 5.14 will bring the embedded Radius Server (which I understand are available even in earlier versions) with Radius users (though understandably it would be with limited user base).

 

  0  
  0  
#20
Options
Re:ER7212PC V1_1.2.0_Build 20240705 Beta for Omada Controller V5.14 (Updated on Jul 9th, 2024)
2024-07-15 17:02:49

  @Clive_A Updated to the latest beta without issue.

  1  
  1  
#21
Options
123

Tags

Firmware Update
Related Articles
How to update Omada software on ER7212PC?
2124 1
 ER7212PC - Omada Controller
2147 0
 Port Mirroring in ER7212PC V1_1.0.4_Build 20230724 Beta Firmware
1253 0
ER7212PC firmware not to date
1383 0
Will ER7212PC update with IDS/IPS?
447 1
Expected Firmware Release for ER7212PC Router
646 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.