Business Community > Routers > How to set priority for a set of clients
< Routers

How to set priority for a set of clients

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to set priority for a set of clients

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to set priority for a set of clients
How to set priority for a set of clients
2024-05-14 22:00:02 - last edited 2024-05-15 01:04:26
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: 1.4.1

I've just rolled out omada managed switches and endpoints.  Before this I was using a Deco system which allowed me to tag some devices as "high priority"

 

How can I do something similar with the business tools?  I'm running an Omada controller.

 

Thanks in advance.

 

Tom

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:How to set priority for a set of clients-Solution
2024-05-15 01:04:21 - last edited 2024-05-15 01:04:26

Hi @LeadershipGeek 

Thanks for posting in our business forum.

No. There is not. You can consider the QoS if your model supports it.

Bear in mind that the business products are not the same as the home ones from the setup process to the key features. QoS on the business products are manually configured.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:How to set priority for a set of clients-Solution
2024-05-15 01:04:21 - last edited 2024-05-15 01:04:26

Hi @LeadershipGeek 

Thanks for posting in our business forum.

No. There is not. You can consider the QoS if your model supports it.

Bear in mind that the business products are not the same as the home ones from the setup process to the key features. QoS on the business products are manually configured.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
Re:How to set priority for a set of clients
2024-05-15 01:14:12

  @Clive_A - that is unfortunate.  My model DOES support QOS.  Can you point me to an overview of how to configure QOS?

  0  
  0  
#3
Options
Re:How to set priority for a set of clients
2024-05-15 01:29:31

Hi @LeadershipGeek 

Thanks for posting in our business forum.

LeadershipGeek wrote

  @Clive_A - that is unfortunate.  My model DOES support QOS.  Can you point me to an overview of how to configure QOS?

How to Configure QoS (Quality of Service) on Omada Router

Go to our label and check more guides:

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 556

Replies: 3

Related Articles
Cannot set up the L2TP-VPN
383 0
 How do I set up Split Tunneling?
2376 0
How to Set Bandwidth Ratio between WAN1 & WAN2 on ER7206 V2
454 0
Set up
671 0
 Can‘t set bandwidth limit on ER7206.
607 0
 How to set CyberGhostVPN in Omada ER7206, is possible?
512 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.