ER8411 - Unable to port forward same port number for multiple WAN alias IPs
Hi Team
Previously raised this but though best to bring it to a new thread as previously it was off the back of the beta firmware ticket below:
https://community.tp-link.com/en/home/forum/topic/636166
Still unable to allocate the same port number individually to different external WAN IP address aliases:
Example:
Existing Rule 1:
Source: Any
Interface: All
WAN IP: Blank (Unable to specify IP xxx.xxx.xxx.194)
Source Port: 80
Destination IP: xx.xx.xx.2
Destination Port: 80
Protocol: All
Desired Rule 2:
Source: Any
Interface: All
WAN IP: xxx.xxx.xxx.195
Source Port: 80
Destination IP: xx.xx.xx.6
Destination Port: 80
Protocol: All
Many thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Jamie_S
Thanks for posting in our business forum.
As we discussed in the ticket, the official release would be V5.15(ETA). So, do you mean now you need a beta for the Linux controller? As I recall it would require both router and controller to be adapted to what you requested.
- Copy Link
- Report Inappropriate Content
Hi @Jamie_S
Thanks for posting in our business forum.
As we discussed in the ticket, the official release would be V5.15(ETA). So, do you mean now you need a beta for the Linux controller? As I recall it would require both router and controller to be adapted to what you requested.
- Copy Link
- Report Inappropriate Content
hello,
i have some problem.
this feature are enable with 5.15 ? when this firmware will be released ?
thanks
Marco
- Copy Link
- Report Inappropriate Content
@Clive_A sorry thought I'd replied to this.
If it's just a BETA controller version to test it that's fine. If it causes any issues I can easily re-instate the previous version.
Sadly I can't put BETA firmwares on the router now as it's heavily in production and it would be too high a risk.
Current controller is on 5.13.30.8 and is indeed Linux. Current ER8411 firmware is 1.2.1 Build 20240308 Rel.75819
Many thanks
- Copy Link
- Report Inappropriate Content
Hi @Clive_A
Gateway : ER8411 v1
Harware Controller : OC300 v1
Facing the same issue.
When is the 5.15 version likely to be officially released for the OC300 controller?
Is there a work around to make it possible i.e., to port forward same port number for multiple WAN alias IPs?
Regards
Lennox Rajkumar
Aenon Infotech
- Copy Link
- Report Inappropriate Content
Hi @aenon
Thanks for posting in our business forum.
aenon wrote
Hi @Clive_A
Gateway : ER8411 v1
Harware Controller : OC300 v1
Facing the same issue.
When is the 5.15 version likely to be officially released for the OC300 controller?
Is there a work around to make it possible i.e., to port forward same port number for multiple WAN alias IPs?
Regards
Lennox Rajkumar
Aenon Infotech
As already explained in the link and this post, there is a beta firmware. The official fix is V5.15.X. No further information that I can provide.
Solution to Port Forwarding Issues with WAN Alias - Same Port Not Allowed
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 572
Replies: 5
Voters 0
No one has voted for it yet.