Business Community > Controllers > Can't update ER605
< Controllers

Can't update ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't update ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't update ER605
Can't update ER605
2024-05-05 22:23:46
Model: OC200  
Hardware Version: V2
Firmware Version: 5.13.30.20

I'm trying to update my ER605 with firmware 2.2.4 and it keeps failing with this message:

 

[Failed]Failed to upgrade 50-91-E3-44-05-26 to firmware version 2.2.3 Build 20231201 Rel.32918 online. Please check your network configuration and make sure the device can access the Controller's HTTPS management port.

 

First, the error message seems to indicate that it's attempting to upgrade to the firmware version it's already running, unless I'm misinterpreting.  Regarding the rest of the message: the HTTPS management port of the OC200 is 443, which I think is correct.  My configuration is simple: an ER605 with an active WAN connection connected via LAN to a POE switch, with the OC200 and a laptop also connected via wired.  What do I need to do to enable the ER605 to access the OC200?

 

I've already tried downloading the firmware and doing a manual update.  It gives the same error.

 

-Tom

  0      
 
  0      
 
#1
Options
3 Reply
Re:Can't update ER605
2024-05-06 09:48:16

 

xlurkr wrote

I'm trying to update my ER605 with firmware 2.2.4 and it keeps failing with this message:

 

[Failed]Failed to upgrade 50-91-E3-44-05-26 to firmware version 2.2.3 Build 20231201 Rel.32918 online. Please check your network configuration and make sure the device can access the Controller's HTTPS management port.

 

First, the error message seems to indicate that it's attempting to upgrade to the firmware version it's already running, unless I'm misinterpreting.  Regarding the rest of the message: the HTTPS management port of the OC200 is 443, which I think is correct.  My configuration is simple: an ER605 with an active WAN connection connected via LAN to a POE switch, with the OC200 and a laptop also connected via wired.  What do I need to do to enable the ER605 to access the OC200?

 

I've already tried downloading the firmware and doing a manual update.  It gives the same error.

 

-Tom

Hi @xlurkr 

We have troubleshooting steps when you fail to upgrade the firmware via controller. Please refer to the troubleshooting steps and try again.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Can't update ER605
2024-05-06 13:16:35
Thanks for responding. I'm trying to follow the troubleshooting steps, and I'm asking for help to do so. Here's what the steps say: Make sure your port 443(hardware controller) or 8043(software controller) is open and accessible from target device. If it is not open, you are not able to upgrade. As I said in my message, the configuration page for my OC200 says the HTTPS configuration port is 443. How can I "make sure it is open and accessible from the target device?" -Tom
  0  
  0  
#3
Options
Re:Can't update ER605
2024-05-16 14:53:46

Update: I gave up.  I unadopted the ER605 from the OC200 and updated the firmware the hard way.  Then I readopted it, and a) it didn't fix my "no WAN status reported" problem that I documented elsewhere and b) it got stuck the the adopting loop that others have documented elsewhere, which kept causing it to fail to give my devices valid DHCP addresses when they expired, and severed their WAN connections.  So for the time being, I can't include my ER605 in my small OC200 network, even though both are now running the latest firmware.  That sucks.  I guess I have little choice but to keep trying new firmware versions as they come out.

 

-Tom

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 296

Replies: 3

Related Articles
ER605 Firmware Update
106 0
Firmaware update silently fails on ER605
454 0
Surprise firmware update to ER605 V2
2840 0
 Update ER605(UN)_v2_2.0.2
745 0
 Can't login into ER605 after adoption
1608 0
 ER605 can't communicate with LAN
569 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.