Home

Forums

Stories

Knowledge Base

Business Community > Switches > System Time bug on TL-SG3428X 1.0 (reboot looses settings)

< Switches

System Time bug on TL-SG3428X 1.0 (reboot looses settings)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

System Time bug on TL-SG3428X 1.0 (reboot looses settings)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Pugs

2024-04-29 10:10:37 - last edited 2024-06-11 10:58:37

Posts: 59

Helpful: 12

Solutions: 0

Stories: 0

Registered: 2020-07-06

System Time bug on TL-SG3428X 1.0 (reboot looses settings)

2024-04-29 10:10:37 - last edited 2024-06-11 10:58:37

Model: TL-SG3428X

Hardware Version: V1

Firmware Version: 1.0.10 Build 20221130 Rel.57838

Reporting a bug on this switch (V1).

On reboot of the switch, loose settings in System Time - Get Time from NTP Server (configured to use two local rfc1918 addresses). It then defaults back to Bejing (GMT +8) NTP servers.

This behavior occurs on every reboot and requires manual intervention to change the NTP servers back to a local router & NAS NTP servers

1 Accepted Solution

Md-Ripon3

LV2

2024-05-08 02:35:27 - last edited 2024-06-11 10:58:37

Posts: 30

Helpful: 4

Solutions: 7

Stories: 0

Registered: 2023-09-25

Re:System Time bug on TL-SG3428X 1.0 (reboot looses settings)-Solution

2024-05-08 02:35:27 - last edited 2024-06-11 10:58:37

I've always used it this way on my SG3428X and never had this problem, maybe you should try upgrading the firmware to the latest version first. Your firmware version is too old. https://static.tp-link.com/upload/firmware/2023/202312/20231227/SG3428X(UN)_v1.30_1.32_1.30.0%20Build%2020231019.zip

System Time bug on TL-SG3428X 1.0 (reboot looses settings)

System Time bug on TL-SG3428X 1.0 (reboot looses settings)

Information

Voters 0

Tags