SWITCH DOESNT RECOGNISE ROOT PORT WHEN CONNECT WITH HUAWEI SWITCH

SWITCH DOESNT RECOGNISE ROOT PORT WHEN CONNECT WITH HUAWEI SWITCH

SWITCH DOESNT RECOGNISE ROOT PORT WHEN CONNECT WITH HUAWEI SWITCH
SWITCH DOESNT RECOGNISE ROOT PORT WHEN CONNECT WITH HUAWEI SWITCH
2024-04-28 09:52:53
Model: TL-SX3008F  
Hardware Version: V1
Firmware Version:

Hi we have connect tplink switch with huawei switch in rstp. When we connect tp link with huawei , tp link doesn't recognise root port. 

 

Eg. 

Port 4 is connected with huawei port shows designated. 

 

But when maipu come in between tplink and Huawei , same port no. 4 shows as root and other at designated. 

 

We tried multiple settings but doesn't work. 

 

We have 2 switches both have same problem 

  0      
  0      
#1
Options
3 Reply
Re:SWITCH DOESNT RECOGNISE ROOT PORT WHEN CONNECT WITH HUAWEI SWITCH
2024-04-29 01:05:36 - last edited 2024-04-29 01:22:17

Hi @Maximums 

Thanks for posting in our business forum.

Does the RSTP work properly between two TP-Link switch?

It could be a compatible issue with Huawei. But we need some time before I submit a test.

 

I don't understand your "does not recognize" root meaning. Please be specific about this part. I tested two Omada switches and I don't think I see the issue here.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#2
Options
Re:SWITCH DOESNT RECOGNISE ROOT PORT WHEN CONNECT WITH HUAWEI SWITCH
2024-05-08 11:28:03

  @Clive_A  thank you for Replying.

 

We are an isp and we have arround 30+ switches in RSTP. 

 

we have Huawei switch as core Switch..  when we connect Tplink with Huawei switch say huawei port 1 to tplink port 1. Port gets up but it shows port role Designated on tplink port1. the same port should become Root. 

 

when i connect maipu or edgcore switch in between huawei and tplink .. port 1 on tplink becomes port role Root.  

 

kindly give us a solution over this ... 

 

 

 

  0  
  0  
#3
Options
Re:SWITCH DOESNT RECOGNISE ROOT PORT WHEN CONNECT WITH HUAWEI SWITCH
2024-05-09 01:31:50

Hi @Maximums 

Thanks for posting in our business forum.

Maximums wrote

  @Clive_A  thank you for Replying.

 

We are an isp and we have arround 30+ switches in RSTP. 

 

we have Huawei switch as core Switch..  when we connect Tplink with Huawei switch say huawei port 1 to tplink port 1. Port gets up but it shows port role Designated on tplink port1. the same port should become Root. 

 

when i connect maipu or edgcore switch in between huawei and tplink .. port 1 on tplink becomes port role Root.  

 

kindly give us a solution over this ... 

 

 

 

Change the priority of the RSTP on the TP-Link. Will it be recognized as the Root?

The priority of other vendors might be higher than our default value. That might be the case where you see a different result.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#4
Options