Need advice for ER605 v2.0 settings
Hello,
I am trying to set up Omada system.
My router is ER605 v2.0, Hardware controller OC200 and the Switch TL-SG2008P
at the router setup I receive IP conflict the IP address is 192.168.0.1 the error message is
"The IP addresses/Gateway of the WAN and LAN port Should not in a same subnet."
Would any body advice what I am missing.
Thank you for your time in advance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @imeera
Thanks for posting in our business forum.
The literal meaning of the error. Your WAN is 192.168.0.1/24 and this is not gonna be correct if you set the LAN to 192.168.0.1/24.
So, consider setting the LAN to a different subnet like 192.168.1.1/24.
- Copy Link
- Report Inappropriate Content
Hi @imeera
Thanks for posting in our business forum.
The literal meaning of the error. Your WAN is 192.168.0.1/24 and this is not gonna be correct if you set the LAN to 192.168.0.1/24.
So, consider setting the LAN to a different subnet like 192.168.1.1/24.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 414
Replies: 2
Voters 0
No one has voted for it yet.