Trunk between switch
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi all,
I write couse I need some help to set-up a VLAN trunk between 2 switches
In particular the the trunk is between port 3 Omada switch and port 1 on Netgear (GS308E) switch. Port 23 is the router port
Here are the setting of the 2 switches
Port 3 is tagged in every VLAN, here is an example of the VLAN 30
Here is the config in netgear
I this way everything connect at port of the Netgear switch does not work
What do I miss?
Thanks in advance
Hi @xHAWAKx
Hold on. Read again. Port 2 on the NG is a PC? I thought it was a switch or something.
So, if you are gonna post a VLAN thing next time, not just on this forum, make sure you draw a diagram for the sake of others' understanding. I am not gonna put that much energy into your single case which is also very easy VLAN. Reading guides could fix it but I tried to give you direction command. I drew a diagram myself based on your description and sometimes people's description makes no sense to me. Save my time and energy and yours.
This should work now. If don't, your DHCP might not be working properly. PC uses untagged, with PVID.
This was explained in other posts by me several times. Be sure you do some research.