VIGI NVR Hikvision Unauthorized
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I attach to the nvr from tplink camera hiklvision hwi-t240h
sometimes I manage to connect it but after a power failure (the camera turns off and on) the nvr always says unauthorized on the cameras. The password in the nvr to connect to the cameras and the admin account in the hikvision camera (hwi-t240h) are the same
Do you have any tip where could be the problem ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
so I figured this out
after disconnecting and connecting the camera from the network I have to first log in to the hikvision ip camera and then log in to the camera in tplink nvr and only then the camera starts to work, after a power failure I have to repeat this procedure, do you have any ideas how to solve this so that it is configured only once ?
- Copy Link
- Report Inappropriate Content
Hi @MASPR
Thanks for posting in our business forum.
MASPR wrote
so I figured this out
after disconnecting and connecting the camera from the network I have to first log in to the hikvision ip camera and then log in to the camera in tplink nvr and only then the camera starts to work, after a power failure I have to repeat this procedure, do you have any ideas how to solve this so that it is configured only once ?
It is a common symptom of the IPC. There is no way for us to fix it. It is not a problem with the NVR instead with the IPC.
Your steps are correct to fix it.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
so I figured this out
after disconnecting and connecting the camera from the network I have to first log in to the hikvision ip camera and then log in to the camera in tplink nvr and only then the camera starts to work, after a power failure I have to repeat this procedure, do you have any ideas how to solve this so that it is configured only once ?
- Copy Link
- Report Inappropriate Content
Hi @MASPR
Thanks for posting in our business forum.
MASPR wrote
so I figured this out
after disconnecting and connecting the camera from the network I have to first log in to the hikvision ip camera and then log in to the camera in tplink nvr and only then the camera starts to work, after a power failure I have to repeat this procedure, do you have any ideas how to solve this so that it is configured only once ?
It is a common symptom of the IPC. There is no way for us to fix it. It is not a problem with the NVR instead with the IPC.
Your steps are correct to fix it.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 945
Replies: 3
Voters 0
No one has voted for it yet.