Business Community > Switches > Gather logs from non-supported switches in Omada
< Switches

Gather logs from non-supported switches in Omada

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Gather logs from non-supported switches in Omada

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Gather logs from non-supported switches in Omada
Gather logs from non-supported switches in Omada
2024-02-05 08:55:28 - last edited 2024-02-06 01:42:24
Tags: #Configuration #Controller
Model: TL-SG2452  
Hardware Version:
Firmware Version:

Hi,

it is possible to gather and view logs from non supported older switches like TL-SG2452, T2600G-28TS etc, in locally placed based Omada controller?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Gather logs from non-supported switches in Omada-Solution
2024-02-06 01:42:05 - last edited 2024-02-06 01:42:07

Hi @Tutek 

Thanks for posting in our business forum.

No. Not supported models are not connected to the Controller and you have nothing to view on it.

Why not use syslog and gather everything to the syslog software? So you can abandon the Omada Controller log and use the single software to monitor all the logs. That'll be a workaround.

 

Syslog is a term to describe the log system and we do not have any recommendations or responsibility for your choice.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Gather logs from non-supported switches in Omada-Solution
2024-02-06 01:42:05 - last edited 2024-02-06 01:42:07

Hi @Tutek 

Thanks for posting in our business forum.

No. Not supported models are not connected to the Controller and you have nothing to view on it.

Why not use syslog and gather everything to the syslog software? So you can abandon the Omada Controller log and use the single software to monitor all the logs. That'll be a workaround.

 

Syslog is a term to describe the log system and we do not have any recommendations or responsibility for your choice.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 507

Replies: 1

Tags

Configuration Controller
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.