Roaming von ER706W not working
Hello!
does anybody else have problems with roaming and ER706W ?
contellation:
ER706W v1.0 , SG2210P v5.20 and EAP650(EU) v1.0
Wifi is working on chn: 100-116 DFS and 160Mhz chn.width.
roaming is working from EAP650 -> ER706W perfect. I can see, wifi is getting worse and than its perfect again if I am moving from eap650 to er706w. but if I am in the area of ER706W and going back to EAP650, I am hanging on er706w till I get 0% connection, than I see 4G/5G for ex. an mobile phone, and than I am connected to EAP650 again.
Not very useful feature ;-) I got the ER706W for not buying ER605 + another eap650, now the situation is a big disappointment.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
there is no doubt that there is something that is not quite as it should be with your network, but now I wanted to test a little more here and I adopted an EAP653 here to labbing a little more, I don't have the opportunity to connect the access point with a cable so it meshes wirelessly.
my setup is like this.
the phone that I am testing with is connected with wifi6 and wpa3. now I have gone back and forth many times and it roams without problems every time as you can see here.
I use channel 112 80 Mhz bandwith av wirelss mesh, mybee there is some differences some plase. mybee you should try 80Mhz bandwith to se if there is any differences.
- Copy Link
- Report Inappropriate Content
I stil use 160Mhz, but I'll try out 80MHz. With 160MHz I get full 1Gbps of the internet connection....
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi mate
it is not resolved, but working with wpa2.
hardware is:
Pixel 7 and pixel 7 pro, newest os, macbook air with ventura, surface with win11 and 2 huawei win11 notebooks....
- Copy Link
- Report Inappropriate Content
But now I have found another funny "bug".
Under services, I set up an automatic reboot every week in the night from sunday to monday. After reboot internet is limited to 100Mbit, although I have 1Gbit.
Last time, after second reboot of the ER706W full Gigabit connection was available. But I dont remeber, if I rebooted the er706w over omada or just took the powercord...
yesterday, monday, I wondered about slow download speed, the problem with limited 100Mbit was there again. I rebooted over Omada, but it stil had 100mbit.
Then I did, what I normally do on omada by my customers with similar problems: forced provisioning. After 5-10 minutes selfconfigurating, 1Gbit internet connection was available again.
Should I open new thread...? :-)
thanks
- Copy Link
- Report Inappropriate Content
Hi @kogan
Thanks for posting in our business forum.
kogan wrote
But now I have found another funny "bug".
Under services, I set up an automatic reboot every week in the night from sunday to monday. After reboot internet is limited to 100Mbit, although I have 1Gbit.
Last time, after second reboot of the ER706W full Gigabit connection was available. But I dont remeber, if I rebooted the er706w over omada or just took the powercord...
yesterday, monday, I wondered about slow download speed, the problem with limited 100Mbit was there again. I rebooted over Omada, but it stil had 100mbit.
Then I did, what I normally do on omada by my customers with similar problems: forced provisioning. After 5-10 minutes selfconfigurating, 1Gbit internet connection was available again.
Should I open new thread...? :-)
thanks
You might replace the cable. Common to me and the only cause would be the cable.
If you disagree with this, let me know the cable length.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
maybe it wasnt seen that good, I took YELLOW now :-) only 1m, goes behind and comes down out to the cable router
- Copy Link
- Report Inappropriate Content
Hi @kogan
Thanks for posting in our business forum.
kogan wrote
maybe it wasnt seen that good, I took YELLOW now :-) only 1m, goes behind and comes down out to the cable router
Yes, that was too dark. So I assume that Fujitsu is your cable router(modem), right?
So I will focus on the first issue reported. Roaming issue. There was a similar report on that but on two different models which do not fit yours, and on iPhone only.
This 100M after the reboot, I will, later on, check with the test and dev team and see if they have ever received any feedback or can reproduce in the lab.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3959
Replies: 49
Voters 0
No one has voted for it yet.