ER8411 V1_1.2.0_Build 20240112 Beta Firmware for Omada Controller V5.13 (Released on Jan 12th, 2024)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER8411 V1_1.2.0_Build 20240112 Beta Firmware for Omada Controller V5.13 (Released on Jan 12th, 2024)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER8411 V1_1.2.0_Build 20240112 Beta Firmware for Omada Controller V5.13 (Released on Jan 12th, 2024)
ER8411 V1_1.2.0_Build 20240112 Beta Firmware for Omada Controller V5.13 (Released on Jan 12th, 2024)
2024-01-12 09:38:40 - last edited 2024-05-20 08:03:51
Model: ER8411  
Hardware Version: V1
Firmware Version: 1.2.0 Build 20240112 (Beta)

This Article Applies to:

 

ER8411(UN) V1 1.2.0_Build 20240112 (Beta)

 

Release Notes:

 

New Features & Enhancements:

 

1. Add support for Intrusion Detection/Prevention.

2. Optimized logic for Auto IPsec to select WAN port.

3. Add support for SHA512/384/256 for OpenVPN.

 

Bug Fixed:

 

1. Fixed several security vulnerabilities.

 

Firmware Download:

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Gateways

 

Firmware Download Link

ER8411(UN) V1_1.2.0_Build 20240112 (Beta)

Notes:

(1) The above firmware is applied to ER8411 V1/1.6.

(2) Your device’s configuration won’t be lost after upgrading.

 

Additional Information

All feedback is welcome, including letting us know about successful device upgrades.

If somehow you encounter an issue during or after the upgrade, it's suggested to contact us with the following info:

  • Omada Controller version 
  • Device Firmware version with Build number (previous and current)

 

If your router gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.

How to use the Emergency Mode to recover the firmware for Omada Gateways

 

Update Log:

 

Jan 12th, 2024:

Release of this post.

 

Recommended Threads:

 

Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  2      
  2      
#1
Options
6 Reply
Re:ER8411 V1_1.2.0_Build 20240112 Beta Firmware for Omada Controller V5.13 (Released on Jan 12th, 2023)
2024-01-13 08:22:39

  @Clive_A 

 

The upgrade went with minor problems.
35 very long and painful minutes with upgrade, configuring and 2 offline messages, the router was finally with the status conneted. all vpn tunnels worked but no internet. tried to ping both ip and name but nothing happened.
restarted the router and after the restart everything was fine.
after a few hours I lost internet again, did another restart and everything was online again. I don't know if this was because I was playing with IDS/IPS. now the router has been stable since yesterday.

 

so I'll see what happens next in the next few days smiley

 

 

  1  
  1  
#2
Options
Re:ER8411 V1_1.2.0_Build 20240112 Beta Firmware for Omada Controller V5.13 (Released on Jan 12th, 2023)
2024-01-15 21:48:33

  @MR.S Any issues after a few days now?

  0  
  0  
#3
Options
Re:ER8411 V1_1.2.0_Build 20240112 Beta Firmware for Omada Controller V5.13 (Released on Jan 12th, 2023)
2024-01-16 05:43:19

  @OrangeStreet 

 

so far so good smiley

  0  
  0  
#4
Options
Re:ER8411 V1_1.2.0_Build 20240112 Beta Firmware for Omada Controller V5.13 (Released on Jan 12th, 2023)
2024-01-17 02:22:55 - last edited 2024-01-17 02:23:37

  @Clive_A Ran the upgrade and in my case it went smoothly - took about 10 minutes. Although the constant "disconnected" messages were annoying. I did not have to reboot it at all and my internet came back online just fine. I also enabled IDS/IPS and the CPU and RAM looks good so far. I do have one question however. There is a section where you can define what to block and if you look you will see this in the 'custom' level setting:

 

I get blocking ActiveX and even User Agents but why on earth would DNS be listed in the IDS/IPS? What would enabling that setting do?

 

Thanks!

  0  
  0  
#5
Options
Re:ER8411 V1_1.2.0_Build 20240112 Beta Firmware for Omada Controller V5.13 (Released on Jan 12th, 2023)
2024-01-22 07:58:46

Hi @OrangeStreet 

Thanks for posting in our business forum.

OrangeStreet wrote

  @Clive_A Ran the upgrade and in my case it went smoothly - took about 10 minutes. Although the constant "disconnected" messages were annoying. I did not have to reboot it at all and my internet came back online just fine. I also enabled IDS/IPS and the CPU and RAM looks good so far. I do have one question however. There is a section where you can define what to block and if you look you will see this in the 'custom' level setting:

 

I get blocking ActiveX and even User Agents but why on earth would DNS be listed in the IDS/IPS? What would enabling that setting do?

 

Thanks!

If you browse through that, you will also get the following options. It is useful for some certain groups of people in some situations.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#6
Options
Re:ER8411 V1_1.2.0_Build 20240112 Beta Firmware for Omada Controller V5.13 (Released on Jan 12th, 2023)
2024-01-22 20:22:22 - last edited 2024-01-22 20:25:01

  @Clive_A I don't know what you mean by "browse through that" as I cannot find those more specific items you show in that screenshot - is there a place where you can edit threat categories?

 

These are the only options I see:

 

  1  
  1  
#7
Options