SG2005P-PD where to enable POE injector mode?
Okay, I'm stumped. I can usually fumble through the settings to find what I need, but can't seem to find where/how to make the new 5 port switch utilize injector mode (I am used to the Unifi Flex settings) so that I can use the full POE power through this switch. I am using an Airfiber 50v 60w injector as I have a lot of these that I use for the Unifi Flex switches. Right now the SG2005P-PD is only allowing very minimal POE power like it is not detecting that I am using a POE++ injector. How do I force it recognize the POE injector?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Same problem
SG2005P-PD + TL-POE160S / TL-POE170S (170S was bought due to I thought that 160S has not enough power budget)
PoE leds on both injectors are green.
For both injectors on SG2005P-PD I see only 19W total budget.
Injectors is near the switch.
Cables changed too.
And if load higher 19W it disconnects "extra" load i.e. looks like SG2005P-PD firmware not correctly recognizes PoE protocols.
SG2005P-PD v1.0
Firmware Version:
1.0.1 Build 20231013 Rel.66888
OC200 2.0
FW version 2.14.4 Build 20240304 Rel.54311
Controller version 5.13.30.20
- Copy Link
- Report Inappropriate Content
I tried it myself with POE170S and SG2005-PD, there is no abnormal problem with POE power supply, and the display on Controller is normal. I am using the latest version of Controlller software.
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
VladVS wrote
Same problem
SG2005P-PD + TL-POE160S / TL-POE170S (170S was bought due to I thought that 160S has not enough power budget)
PoE leds on both injectors are green.
For both injectors on SG2005P-PD I see only 19W total budget.
Injectors is near the switch.
Cables changed too.
And if load higher 19W it disconnects "extra" load i.e. looks like SG2005P-PD firmware not correctly recognizes PoE protocols.
SG2005P-PD v1.0
Firmware Version:
1.0.1 Build 20231013 Rel.66888
OC200 2.0FW version 2.14.4 Build 20240304 Rel.54311
Controller version 5.13.30.20
Per what you described, even with the POE170S, you experience the budget displaying as 19W?
Can you confirm this? Please upload a screenshot. Our team did not replicate the same issue. Another member on the forum did not experience the same issue.
The OP actually resolved the issue when he used 170S as I recall. When he switched from the UBNT injector to ours, everything worked correctly.
- Copy Link
- Report Inappropriate Content
@Clive_A
Now I have connected 170S, free budget is 8.3W, used 6.4W+4.3W i.e. total 19W
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @VladVS
Thanks for posting in our business forum.
Noted. What's the length of your cable? From the PoE OUT to the 2005P-PD? Tried any 3ft cable, any difference?
- Copy Link
- Report Inappropriate Content
@Clive_A
Usually ~10meters cable.
But right now conencted with 1m cable - no changes.
Also at least the same problem was reported by
https://community.tp-link.com/en/business/forum/topic/650020?replyId=1343092
- Copy Link
- Report Inappropriate Content
@Clive_A I have the exact same behaviour. I use a TRENDnet TPE-119GI with 95W. I got 3 devices with 2.3W, 3.7W and 7.4W and remaining 5.6W. Cable is 11m long
- Copy Link
- Report Inappropriate Content
Hi @oeko2002
Thanks for posting in our business forum.
oeko2002 wrote
@Clive_A I have the exact same behaviour. I use a TRENDnet TPE-119GI with 95W. I got 3 devices with 2.3W, 3.7W and 7.4W and remaining 5.6W. Cable is 11m long
As discussed in the previous replies, we don't have a compatibility list and if there is an issue with the PoE budget, please consider our PoE adapter.
Secondly, use a 3ft cable for test purposes.
- Copy Link
- Report Inappropriate Content
Hi @VladVS
Thanks for posting in our business forum.
VladVS wrote
@Clive_A
Usually ~10meters cable.
But right now conencted with 1m cable - no changes.
Also at least the same problem was reported by
https://community.tp-link.com/en/business/forum/topic/650020?replyId=1343092
It looks like indeed a 3ft cable.
Is the cable made by hand? Or it is purchased from the market? Can you try a new cable that is machine-made?
If possible, can you give me the specs of the cable? Twisted pair information or take a clear picture of the cable where it shows the pairs.
In our lab, we tested POE170S V1 and V2 and 1-meter cable with the same firmware and the latest controller like yours. This does not occur in our environment.
Upgrade your controller as well.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4506
Replies: 51
Voters 0
No one has voted for it yet.