@WM1 

Same icon issues, no operational issues yet.  2210P on v5.20

Hi @Landfall2624  @RBL 

Thanks for posting in our business forum.

Landfall2624 wrote

  @RBL Thanks - that helps. Between your report and @WM1, it might be reasonable for me to conclude that the TL-SG2008 switches are OK with the 4.20 update, and it is my TL-SG2218 switch that threw a wobbler and was causing me issues after the 1.20 update. Although, having spent half a day going round in circles trying to diagnose the problem I'm not sure I am ready to update my SG2008 switches again quite yet, until it is clear what the update is for!

 

@Hank21 - On the face of it, that appears to be two of us that have had issues with the 1.20 Update on the TL-SG2218 V1 switch. Is there anything in the update that might cause this / give any clues? In terms of the issues I had - very difficult to pinpoint. My TL-SG2218 is my 'main' switch that everything comes back to before the router - but I was seeing intermittent connectivity to the internet from my devices including my main PC, and also between devices on the network. I run a number of servers / services at home (Hubitat, home assistant, various dashboard etc.) and run a monitoring tool on another device that gives me 'uptime' - this also reported connectivity losses/downtime for all of those devices/services very frequently at different times for brief moments of time (ping loss, unable to connect to web front end). 

Both of you can start a new thread to describe your issue. This case should be done because Hank is responsible for the controller and had this report.

I am the one who takes care of the switch issue. So I expect to see a clear description of your issue. Read the basic troubleshooting guide pinned on the forum. Provide information and I'll help you there.