Home

Forums

Stories

Knowledge Base

Business Community > Routers > No Way - What made TP-Link change their mind?

< Routers

No Way - What made TP-Link change their mind?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No Way - What made TP-Link change their mind?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Npallavi

2023-12-21 21:52:33

Posts: 14

Helpful: 16

Solutions: 0

Stories: 0

Registered: 2023-06-04

No Way - What made TP-Link change their mind?

2023-12-21 21:52:33

Tags: #Firmware Update

Model: ER605 (TL-R605)

Hardware Version: V1

Firmware Version: 1.3.1

@TP-Link ,

After nearly a year of people being censored, being told the new routers we had just purchased were no longer being supported I awake to a notification from Home Assistant.

TP-LINK NEW FIRMWARE

What ? What is this? Is it Christmas already? Ohh no am I dead?

I went through all the emotions this fine raining morning as I make my morning brew.

I'm alive, I have lost an arm or a leg, yes I still have sheitty toddler nappies that need change. I'm confused, as I sit with my brew finally. It's confirmed.

TP-link has changed their mind, an entire year later and give us Firmware version 1.3.1 build 20231207. Ohh many must be jumping in joy, the weak code provided to us last firmware version allowing enticing TCP Attacks and being to the solution to stop the error logs was simply to just unblock the attacks.

That's until you read the release note: This firmware fixed some known security vulnerabilities.

Great TP-Link 👍, 12 months, another bull sheit firmware, still telling your customers either you keep up with buying our hardware releases or go unsupported with our software.

Very Christmas 🎄 TP-Link the largest IT company with the most potential still throwing it down the drain letting your competitors gain the advantage as we migrate away.

22 Reply

NinjaMonkey

LV2

2024-01-03 06:44:35

Posts: 49

Helpful: 9

Solutions: 1

Stories: 0

Registered: 2022-11-05

Re:No Way - What made TP-Link change their mind?

2024-01-03 06:44:35

Hi @Clive_A

Custom DDNS fix - per this thread - https://community.tp-link.com/en/business/forum/topic/609288?replyId=1280242 , a bug is confirmed with PPPoE, workaround is available to set as static and then back to PPPoE, for some users it works, but for some others it does not

TCP no-Flag attack fix - per this thread - https://community.tp-link.com/en/business/forum/topic/610802 , known "issue" introduced with v1.3.0, in some routers this alert behavior was adjusted and source-ip added to the logs for clarity and ability to block, Hank21 wrote that it is planned to fix, but no fix is coming... "It's planned to optimize the event notification of "TCP no-Flag attack" in future iterations of the ER605 v1."

DHCP option 66/67 - while option 66 is present in controller mode, option 60 is missing (only there in standalone mode) and option 67 is missing from controller mode, so PXE functionality is very partial in this environment

i believe that these can be fixed at almost no cost to flash storage and maybe take an hour or two of dev time in total.

#22

Clive_A

2024-01-05 06:07:04 - last edited 2024-01-05 06:07:16

Posts: 5940

Helpful: 2909

Solutions: 1354

Stories: 0

Registered: 2023-06-09

Re:No Way - What made TP-Link change their mind?

2024-01-05 06:07:04 - last edited 2024-01-05 06:07:16

Hi @NinjaMonkey

Thanks for posting in our business forum.

NinjaMonkey wrote

Hi @Clive_A

Custom DDNS fix - per this thread - https://community.tp-link.com/en/business/forum/topic/609288?replyId=1280242 , a bug is confirmed with PPPoE, workaround is available to set as static and then back to PPPoE, for some users it works, but for some others it does not

TCP no-Flag attack fix - per this thread - https://community.tp-link.com/en/business/forum/topic/610802 , known "issue" introduced with v1.3.0, in some routers this alert behavior was adjusted and source-ip added to the logs for clarity and ability to block, Hank21 wrote that it is planned to fix, but no fix is coming... "It's planned to optimize the event notification of "TCP no-Flag attack" in future iterations of the ER605 v1."

DHCP option 66/67 - while option 66 is present in controller mode, option 60 is missing (only there in standalone mode) and option 67 is missing from controller mode, so PXE functionality is very partial in this environment

i believe that these can be fixed at almost no cost to flash storage and maybe take an hour or two of dev time in total.

When I wrote the report to the dev, I found something you said inaccurate.

1. DHCP Option 60 and 66 are available in Controller mode. Only 67 is missing.

2. TCP no-flag attack would be optimized but did not say we would add source-ip. About whether this has been optimized or not, I'll ask the dev.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

#23

No Way - What made TP-Link change their mind?

No Way - What made TP-Link change their mind?

Information

Voters 0

Tags