I have enabled DPI on my ER8411 and I also use PPSK and I want to make sure that ALL of the networks assigned to the PPSK profiles are blocked from those sites (in the "Assign Restrictions" section of DPI). I own a 24 unit apartment complex and have 24 networks with VLANs each limited to 5 IPs (so a max of 120 devices, which isn't that much). The problem is I can't add all of the networks to the DPI restrictions - I added LAN and some of the others but then I reach the limit (8-10?). Is there a way I can apply this to ALL of the networks assigned to the PPSK profiles? Limiting this to around 10 when using PPSK this way is too restrictive and in my case the actual number of potential devices is low.