Route IPs through different DNS servers
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Good afternoon.
I hope everyone is okay.
I have just installed the ER7206 as my router (two WANs, DHCP) for my home. My switch is a TL-SG116E and my WIFI modem is a Deco M5.
I'm looking for a way to make the IPs of my son's PC, cell phone and tablet be directed to a DNS server and the other IPs to another DNS server. Is this possible, considering that my son has a wired connection to his PC and WiFi on his cell phone/tablet?
I'm researching solutions, but I can't find one that suits me 100%.
I will continue researching and I appreciate any and all help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @CristianoP
Thanks for posting in our business forum.
You should create a dedicated VLAN interface for your son. In this VLAN interface, you can specify the IP address, subnet, and DNS server for him.
However, this will work on the ER7206(working as the DHCP server) and switch(for wired connection). But it does not work on your Deco because I don't recall Deco supporting multiple VLANs or SSIDs. So, you also need an EAP for your son.
With the EAP, you can create multiple SSIDs, and you can bind this VLAN for the SSID you make for your son.
For the VLAN interface, you create it in the LAN. And add and set up a new DHCP server. There you can specify the DNS server.
For the VLAN config, you can refer to the guide: How to configure 802.1Q VLAN on TP-Link Easy Smart/Unmanaged Pro Switches
Then on the EAP, create the new SSID for you and your son. The SSID for your son should be set with the SSID VLAN ID you created on the router.
In this whole setup, the most difficult thing would be the tag and untag. So, you should follow the article above. EAP should use tagged port, while other VLAN-unaware devices should use untagged+PVID.
- Copy Link
- Report Inappropriate Content
Hi @CristianoP
Thanks for posting in our business forum.
You should create a dedicated VLAN interface for your son. In this VLAN interface, you can specify the IP address, subnet, and DNS server for him.
However, this will work on the ER7206(working as the DHCP server) and switch(for wired connection). But it does not work on your Deco because I don't recall Deco supporting multiple VLANs or SSIDs. So, you also need an EAP for your son.
With the EAP, you can create multiple SSIDs, and you can bind this VLAN for the SSID you make for your son.
For the VLAN interface, you create it in the LAN. And add and set up a new DHCP server. There you can specify the DNS server.
For the VLAN config, you can refer to the guide: How to configure 802.1Q VLAN on TP-Link Easy Smart/Unmanaged Pro Switches
Then on the EAP, create the new SSID for you and your son. The SSID for your son should be set with the SSID VLAN ID you created on the router.
In this whole setup, the most difficult thing would be the tag and untag. So, you should follow the article above. EAP should use tagged port, while other VLAN-unaware devices should use untagged+PVID.
- Copy Link
- Report Inappropriate Content
Thank you very much for the answer and explanation.
I'll research the solution and read the material and see how I progress.
Good week.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 383
Replies: 2
Voters 0
No one has voted for it yet.