Business Community > Switches > IPv6 Default Gateway in Static routes - IP not accepted
< Switches

IPv6 Default Gateway in Static routes - IP not accepted

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

IPv6 Default Gateway in Static routes - IP not accepted

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
IPv6 Default Gateway in Static routes - IP not accepted
IPv6 Default Gateway in Static routes - IP not accepted
2023-11-17 10:41:16 - last edited 2023-11-27 05:52:07
Tags: #Highlighted Thread #Static Routing
Model: T1600G-28PS(TL-SG2424P)  
Hardware Version: V3
Firmware Version: 3.0.5 Build 20200110 Rel.50207(s)

I'm trying to add a default IPv6 route to my switch, however it keeps failing on the IP address for some reason.

Any ideas as why this could be failing, please? Or how I should go about setting this up?

 

As IPv6 address I type :: to indicate this is the default gateway.

As prefix length I take 64 as honestly I don't know what value I should use.

In the next hop I enter the IPv6 address of my ISP router, which is in this format: 2a02:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx

 

However it keeps failing over and over. Even why I add the ::2 (for which I don't know the purpose neither).

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:IPv6 Default Gateway in Static routes - IP not accepted-Solution
2023-11-23 00:43:19 - last edited 2023-11-24 01:34:34

Hi @Threesa

Thanks for posting in our business forum.
Prefix should be zero.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#6
Options
9 Reply
Re:IPv6 Default Gateway in Static routes - IP not accepted
2023-11-21 09:57:03

Hi @Threesa 

Thanks for posting in our business forum.

Your network diagram and setup. Next hop should be the accessible destination.

And please explain what you mean by fail. Not allow you to input the value? Or input successfully, but not working effectively.

What is the ISP v6 prefix?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:IPv6 Default Gateway in Static routes - IP not accepted
2023-11-21 18:46:31

  @Clive_A 

If I input the entire local IPv6 address of my router (which should be the default Gateway) the frontend doesn't allow it.

If I remove the / the frontend accepts it, but then comes back with the message that it's an incorrect IP address.

 

IPv6 address (local) of the router: 2a02:1811:c511:f400::/64

  0  
  0  
#3
Options
Re:IPv6 Default Gateway in Static routes - IP not accepted
2023-11-22 03:37:18

Hi @Threesa 

Thanks for posting in our business forum.

Can you provide a diagram and full description of your front end, the issue and the error you are talking about?

What do you mean by removing the front and accepting it? Who reported incorrect IP? The front end??

Threesa wrote

  @Clive_A 

If I input the entire local IPv6 address of my router (which should be the default Gateway) the frontend doesn't allow it.

If I remove the / the frontend accepts it, but then comes back with the message that it's an incorrect IP address.

 

IPv6 address (local) of the router: 2a02:1811:c511:f400::/64


I am still confused. With some screenshots to illustrate your issue. Please make a clear description.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options
Re:IPv6 Default Gateway in Static routes - IP not accepted
2023-11-22 05:16:01 - last edited 2023-11-22 05:16:24

  @Clive_A 

 

 

 

 

 

  0  
  0  
#5
Options
Re:IPv6 Default Gateway in Static routes - IP not accepted-Solution
2023-11-23 00:43:19 - last edited 2023-11-24 01:34:34

Hi @Threesa

Thanks for posting in our business forum.
Prefix should be zero.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#6
Options
Re:IPv6 Default Gateway in Static routes - IP not accepted
2023-11-23 18:15:58

  @Clive_A 

OMG! That did it indeed :o
Could you explain me why, please?

  0  
  0  
#7
Options
Re:IPv6 Default Gateway in Static routes - IP not accepted
2023-11-24 01:34:14

Hi @Threesa 

Thanks for posting in our business forum.

Threesa wrote

  @Clive_A 

OMG! That did it indeed :o
Could you explain me why, please?

IPv6 prefix 64 represents a subnet with a large number of available host IP addresses, while IPv6 prefix 0 denotes an unused or reserved IPV6 network address range.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#8
Options
Re:IPv6 Default Gateway in Static routes - IP not accepted
2023-11-24 05:18:20

  @Clive_A 

That much is clear indeed. But why didn't my switch accept it as a value?

Does the 64 prefix imply a limited set of starting digits in the IP address (like the different scopes and subnets in IPv4)? So that the switch didn't accept it, because the IP I tried to enter was out of the range of a 64 prefix network?

  0  
  0  
#9
Options
Re:IPv6 Default Gateway in Static routes - IP not accepted
2023-11-27 01:44:42

Hi @Threesa 

Thanks for posting in our business forum.

Threesa wrote

  @Clive_A 

That much is clear indeed. But why didn't my switch accept it as a value?

Does the 64 prefix imply a limited set of starting digits in the IP address (like the different scopes and subnets in IPv4)? So that the switch didn't accept it, because the IP I tried to enter was out of the range of a 64 prefix network?

Seem to be the case. Yes.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  2  
  2  
#10
Options

Information

Helpful: 0

Views: 645

Replies: 9

Tags

Highlighted Thread Static Routing
Related Articles
 IPV6 default gateway
1066 0
Static routes and DHCP
585 0
 ER-605 IPv6 Static Routes Support?
290 0
Device with static IP not in conected clients list
557 0
 Support for IPv6 static routes and policy routing
568 7
ACL on switch port to deny traffic to local subnet - except to router, and allow internet
2654 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.