Business Community > WiFi > EAP 610 Gives DNS that are not correct
< WiFi

EAP 610 Gives DNS that are not correct

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP 610 Gives DNS that are not correct

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP 610 Gives DNS that are not correct
EAP 610 Gives DNS that are not correct
2023-11-15 10:41:32 - last edited 2023-11-23 06:10:11
Tags: #Network Connectivity
Model: EAP610  
Hardware Version: V2
Firmware Version: 1.02

Good Morning, i have some Eaps (610 mostly) in my bussines, controled by a server, but in one office where i have one AP, it don´t gives de DNS server to the computers correctly, but the router via Lan gives them correctly.

 

where can i configure this in the AP?

 

The DHCP is given by the router and the AP is behind this router, i don´t understand why it gives this directions and where are them located.

Thanks for the support.

 

Regards

Mikel

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:EAP 610 Gives DNS that are not correct-Solution
2023-11-15 19:30:28 - last edited 2023-11-23 06:10:11

  @Mikel_Alvarez 

 

If your APs are Standalone, then this problem should not occur.

 

If you are using an Omada Controller, then the DHCP is defined by the LAN which is assigned to a given SSID, and this is probably where the issue is arising.

 

If you have a remote site, using a different ISP, then you need the SSIDs at that site to reflect those of the local upstream provider, not those at the Controller site.

 

If you want to keep the same SSID across all sites, you  an override the DNS server given to clients, by editing it as a custom DNS server in the LAN network defined for that site.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:EAP 610 Gives DNS that are not correct-Solution
2023-11-15 19:30:28 - last edited 2023-11-23 06:10:11

  @Mikel_Alvarez 

 

If your APs are Standalone, then this problem should not occur.

 

If you are using an Omada Controller, then the DHCP is defined by the LAN which is assigned to a given SSID, and this is probably where the issue is arising.

 

If you have a remote site, using a different ISP, then you need the SSIDs at that site to reflect those of the local upstream provider, not those at the Controller site.

 

If you want to keep the same SSID across all sites, you  an override the DNS server given to clients, by editing it as a custom DNS server in the LAN network defined for that site.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  0  
  0  
#2
Options
Re:EAP 610 Gives DNS that are not correct
2023-11-20 08:40:04

  @d0ugmac1 Thanks a lot, i goes to try by this way.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 488

Replies: 2

Tags

Network Connectivity
Related Articles
 EAP 610- Odd Behavior
420 0
EAP 610 outdoor disconnected
775 0
 EAP-610
2786 0
 EAP 610 Outdoor Performance
1271 0
 EAP 610 OUTDOOR - Disconnected - HELP!
386 0
 Differences between EAP 610 V2 and V3
630 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.