Unmanaged switch connect to managed switch
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can i connect the jetstream L2+ managed switch to unmanaged switch? Will it still working?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @nicorobin
Thanks for posting in our business forum.
You can use it in that way. There should be no problem. L2+ is usually used as the core or convergence layer. Unamanged switch is an access layer. They can work together well but you should know what you are doing on the configuration. Some may not be effective to the ports.
Third-party learning about the multi-layer network switch design:
https://www.ii.pwr.edu.pl/~kano/course/module1/1.1.1.5/1.1.1.5.html
For learning purpose, do not click anything unrelated.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @nicorobin
Thanks for posting in our business forum.
You can use it in that way. There should be no problem. L2+ is usually used as the core or convergence layer. Unamanged switch is an access layer. They can work together well but you should know what you are doing on the configuration. Some may not be effective to the ports.
Third-party learning about the multi-layer network switch design:
https://www.ii.pwr.edu.pl/~kano/course/module1/1.1.1.5/1.1.1.5.html
For learning purpose, do not click anything unrelated.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 534
Replies: 2
Voters 0
No one has voted for it yet.