Business Community > Switches > SG3428X difference between V1, V1.2 and V1.6
< Switches

SG3428X difference between V1, V1.2 and V1.6

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

SG3428X difference between V1, V1.2 and V1.6

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
SG3428X difference between V1, V1.2 and V1.6
SG3428X difference between V1, V1.2 and V1.6
2023-11-04 22:33:09 - last edited 2023-11-06 03:04:53
Model: TL-SG3428X  
Hardware Version: V1
Firmware Version:

Hi all,

I just bought the SG3428X switch. I'm pretty happy about it and I'm doing my experiments.

I have configured it out of Omada Controller for the moment, but I would like to migrate the configuration soon! :)

 

I also upgraded the firmware in Omada at the very beginning of the experiments and Omada picked up the latest version automatically.

However, I noticed that the firmware in the web interface mentions V1, while the label at the boom of the switch and on the packages says V1.2 !

So, what's the difference?

I have seen the size of the firmware is also different...

 

And, since we are here, what is the difference with V1.6 ?

 

Thank you,

Fra

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:SG3428X difference between V1, V1.2 and V1.6-Solution
2023-11-06 03:03:15 - last edited 2023-11-06 03:04:53

Hi @nicolati 

Thanks for posting in our business forum.

Usually V1.0 = V1.6. They are manufactured in different factories.

V1.2 is a special one. Practically, they don't really share the same firmware as the V1.0(or V1.6).

Chipset is usually different between V1.0(V1.6) and V1.2. But the performance would be the same. When you upgrade, please make sure you upload the right firmware version if you got a V1.2.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:SG3428X difference between V1, V1.2 and V1.6-Solution
2023-11-06 03:03:15 - last edited 2023-11-06 03:04:53

Hi @nicolati 

Thanks for posting in our business forum.

Usually V1.0 = V1.6. They are manufactured in different factories.

V1.2 is a special one. Practically, they don't really share the same firmware as the V1.0(or V1.6).

Chipset is usually different between V1.0(V1.6) and V1.2. But the performance would be the same. When you upgrade, please make sure you upload the right firmware version if you got a V1.2.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:SG3428X difference between V1, V1.2 and V1.6
2023-11-06 08:28:40

  @Clive_A Hi Clive,

thx for answering, first of all.

 

The problem is that the web interface says 1.0, while the bottom of the router says 1.20 ...

I'm confused...

 

If Omada flashed the wrong version by mistake, should I see any problem?

Or, if I now flash again with V1.20, will I experience any issue?

 

Thank you,

Fra

  0  
  0  
#3
Options
Re:SG3428X difference between V1, V1.2 and V1.6
2023-11-07 01:53:47

Hi @nicolati 

Thanks for posting in our business forum.

nicolati wrote

  @Clive_A Hi Clive,

thx for answering, first of all.

 

The problem is that the web interface says 1.0, while the bottom of the router says 1.20 ...

I'm confused...

 

If Omada flashed the wrong version by mistake, should I see any problem?

Or, if I now flash again with V1.20, will I experience any issue?

 

Thank you,

Fra

Just flash with the firmware you download from the official website with the right hardware version. You should not run into any issues.

Now you see the label is V1.2, so download the V1.2 from the official website.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options

Information

Helpful: 1

Views: 796

Replies: 3

Related Articles
Problem firmware upgrade SG3428X(UN) V1
1256 0
Differences between Tl-R605 v1 and v1.6
4753 0
What are differences between ER7212PC v 1 and v1.2
591 0
Link or Uplink SG3428X
322 0
Configuring a TP SG3428X switch
2080 0
EAP660 HD firmware for v1 and v1.6 is the same?
974 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.