Business Community > Routers > ER605: Traffic Redirection
< Routers

ER605: Traffic Redirection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605: Traffic Redirection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605: Traffic Redirection
ER605: Traffic Redirection
2023-10-30 20:20:12 - last edited 2023-11-16 06:11:01
Tags: #VLAN & Multi-Networks #Routing
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.2 Build 20231017 Rel.68869
Hi, I'm new here and would like some help.
I have a TL-ER605 v2 Router with 2 ISPs (1 and 2) on port 1 and 2 respectively.
I wanted to create 3 vlans and direct traffic as follows: 
Port 3 -> use the internet of both ISPs through vlan30. 
Port 4 -> use the internet only at ISP1 through vlan40. 
Port 5 -> use the internet only at ISP2 through vlan50. 
Is this configuration possible? 
Is there a better way to direct traffic from ISPs?
  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:ER605: Traffic Redirection-Solution
2023-10-30 23:37:07 - last edited 2023-10-31 03:04:28

  @pleite 

 

To create the vlans do you have a vlan capable switch?   Ideally an omada SDN switch and controller is what you are after

 

If so you can setup policy routes on your vlans to accomplish what you ask

 

Recommended Solution
  0  
  0  
#2
Options
Re:ER605: Traffic Redirection-Solution
2023-10-31 03:02:59 - last edited 2023-10-31 03:03:16

Hi @pleite 

Thanks for posting in our business forum.

With the help of Policy Routing, you can do this.

But you gotta finish creating the VLAN interfaces and assign them correctly.

Configure VLAN 40 and 50 with Policy Routing and you can do it. Don't need to create Policy Routing for VLAN 30.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#3
Options
3 Reply
Re:ER605: Traffic Redirection-Solution
2023-10-30 23:37:07 - last edited 2023-10-31 03:04:28

  @pleite 

 

To create the vlans do you have a vlan capable switch?   Ideally an omada SDN switch and controller is what you are after

 

If so you can setup policy routes on your vlans to accomplish what you ask

 

Recommended Solution
  0  
  0  
#2
Options
Re:ER605: Traffic Redirection-Solution
2023-10-31 03:02:59 - last edited 2023-10-31 03:03:16

Hi @pleite 

Thanks for posting in our business forum.

With the help of Policy Routing, you can do this.

But you gotta finish creating the VLAN interfaces and assign them correctly.

Configure VLAN 40 and 50 with Policy Routing and you can do it. Don't need to create Policy Routing for VLAN 30.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#3
Options
Re:ER605: Traffic Redirection
2023-11-01 19:09:48
Vou tentar isso !
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1059

Replies: 3

Tags

VLAN & Multi-Networks Routing
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.