EAP655-wall , EAP650-wall ( new firmware 1.22 issues)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello everyone,
Yesterday I received the firmware update ( EAP650 (1.1.2) , EAP655 (1.2.2)
and I faced many problems
-1 Phones lose signal 5ghz>
2- Home Assistant - Apple Kit devices stop working or not respond even though they are connected to the network and their signal is strong 90%.
I went back to the old version and everything works fine
Hello @AMG_55,
The PMF feature was supported since Omada Controller v5.7, which requires to upgrade the EAP device firmware to take effect.
While the EAP655-Wall 1.2.2 and EAP650-Wall 1.1.2 are both adapted to controller 5.9, which supports the PMF feature. It seems that your IoT client is non-PMF-capable, so changing PMF from "Mandatory" to "Capable" can fix the issue. If your IoT still has connection issue with the "Capable" option, you may disable PMF for the IoT network.
Could you please also tell your controller version, your previous EAP device firmware with the build number?
Hi @BoboXX，
Go to Settings > Wireless Networks > WLAN > Advanced Settings, here you can see the PMF feature:
