Business Community > Cameras > TP VIGI C540W | Camera doesn't go back it is preset position when rebooted
< Cameras

TP VIGI C540W | Camera doesn't go back it is preset position when rebooted

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP VIGI C540W | Camera doesn't go back it is preset position when rebooted

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP VIGI C540W | Camera doesn't go back it is preset position when rebooted
TP VIGI C540W | Camera doesn't go back it is preset position when rebooted
2023-10-23 09:23:24 - last edited 2023-11-02 06:17:30
Tags: #VIGI Camera
Model: VIGI C540-W  
Hardware Version:
Firmware Version: 2.0.4 Build 230829 Rel. 39900n

Camera doesn't go back to it's preset position when rebooted.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TP VIGI C540W | Camera doesn't go back it is preset position when rebooted-Solution
2023-10-24 03:07:32 - last edited 2023-11-02 06:17:30

Hi @RSalinas 

Thanks for posting in our business forum.

After the reboot, it is supposed to go back to its factory position.

If you have set a preset default position, it cannot go to this position. It goes to the factory position.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:TP VIGI C540W | Camera doesn't go back it is preset position when rebooted-Solution
2023-10-24 03:07:32 - last edited 2023-11-02 06:17:30

Hi @RSalinas 

Thanks for posting in our business forum.

After the reboot, it is supposed to go back to its factory position.

If you have set a preset default position, it cannot go to this position. It goes to the factory position.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 703

Replies: 1

Tags

VIGI Camera
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.