Home

Forums

Stories

Knowledge Base

Business Community > Controllers > Almost touch less set up with OC200,

< Controllers

Almost touch less set up with OC200,

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Almost touch less set up with OC200,

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Swiftlink

2023-09-22 01:56:13 - last edited 2023-09-25 03:23:39

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-09-21

Almost touch less set up with OC200,

2023-09-22 01:56:13 - last edited 2023-09-25 03:23:39

Tags: #Controller #Portal #License

Model: OC200 EAP650

Hardware Version:

Firmware Version:

Wondering if this would work for an almost touch less set up. I have 5 sites to set up, I was wondering if I configure the 5 OC200 at my office and add them to the cloud controller (no licences). Could ship them on site, plug them in, find them on the cloud. Then when the AP650 are addes the OC200 would automatically find them?

1 Accepted Solution

IanCC

LV2

2023-09-22 09:23:46 - last edited 2023-09-25 03:23:39

Posts: 27

Helpful: 24

Solutions: 2

Stories: 0

Registered: 2023-08-14

Re:Almost touch less set up with OC200,-Solution

2023-09-22 09:23:46 - last edited 2023-09-25 03:23:39

@Swiftlink it should work, all you need to do is to make sure that the OC200 are already under your TP LINK CLOUD Account.

After that, you can shift to the site, ask them to attach the OC200 to the omada routers/switch and add the AP's. it will automatically detect the devices which you can easily add.

it should receive a local IP address (DHCP) but just to make sure, configure the IP address of the OC200 to match the IP Address range of the network it will be added unto.

Recommended Solution

1 Reply

IanCC

LV2

2023-09-22 09:23:46 - last edited 2023-09-25 03:23:39

Posts: 27

Helpful: 24

Solutions: 2

Stories: 0

Registered: 2023-08-14

Re:Almost touch less set up with OC200,-Solution

2023-09-22 09:23:46 - last edited 2023-09-25 03:23:39

@Swiftlink it should work, all you need to do is to make sure that the OC200 are already under your TP LINK CLOUD Account.

After that, you can shift to the site, ask them to attach the OC200 to the omada routers/switch and add the AP's. it will automatically detect the devices which you can easily add.

it should receive a local IP address (DHCP) but just to make sure, configure the IP address of the OC200 to match the IP Address range of the network it will be added unto.

Almost touch less set up with OC200,

Almost touch less set up with OC200,

Information

Voters 0

Tags