Business Community > Switches > SOLVED - ACL Issue - Losing connection to dedicated server
< Switches

SOLVED - ACL Issue - Losing connection to dedicated server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

SOLVED - ACL Issue - Losing connection to dedicated server

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
SOLVED - ACL Issue - Losing connection to dedicated server
SOLVED - ACL Issue - Losing connection to dedicated server
2023-09-10 04:02:49 - last edited 2023-09-11 22:22:33
Tags: #VLAN & Multi-Networks #ACL #Solved
Model: TL-SG2428P  
Hardware Version: V5
Firmware Version: 5.0.5

Evening all,

 

I'm having an issue with (continuous) network communication to a DMZ network I have setup for dedicated gaming servers.

 

Here is a brief summary:

 

VLAN 1: 192.168.0.0/24

VLAN30: 192.168.30.0/24

VLAN40: 192.168.40.0/24

DMZ: 10.0.200.0/24

 

I have setup an ACL to deny the DMZ network to communicate to any of the other VLANs setup.

 

Now the issue I have:
At the end of a game (KillingFloor 2 in this instance) The game will come to end (either by loss or victory) and the game will just hang. If I disable the ACL rule I setup at the time of game end, the game will pick up the change/loss of the game and move on. If this is not done, the server will simply time out and I will have to rejoin the server.

When I join the game, it appears that I am joining from my external IP address.

 

EDIT: Question, would mDNS have any resoultion?

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:ACL Issue - Losing connection to dedicated server-Solution
2023-09-11 22:21:39 - last edited 2023-09-11 23:56:19

UPDATE FOR ALL:

So my dedicated game server I am running appears to do a DNS query at end of game to signal that the game is over (win or loss).

Since I was denying access to my internal pihole (and most likely whatever my primary DNS was one) the game wouldn't know that the game ended and the connection to the host would time out.

After I enabled access to my pihole internally (via port 53) I was able to get the server to responding properly.

 

Thank you all for your input and help.

 

EDIT:
 

To clarify, and to make it easier, I setup the ACL rule in the gateway, not the switch. The gateway ER7206, has proper directional ACL rules.

Recommended Solution
  2  
  2  
#8
Options
7 Reply
Re:ACL Issue - Losing connection to dedicated server
2023-09-10 19:24:54

Hey all,

 

Small update for everyone

I've setup a group with 192.168.40.50/32 (this is my IP to my gaming PC)
I setup a new ACL that permits traffic from the DMZ to said group (192.168.40.50/32)
I placed the rules in order of operation (Permit then deny) and I am still having a timeout issue with the server ending.

 

Is there a packet capture feature that I can use to see if there is something not making it back to my desktop?

  0  
  0  
#2
Options
Re:ACL Issue - Losing connection to dedicated server
2023-09-10 19:44:48

  @ss1gohan13 

 

Can't you enable logging on the deny ACL rule?

Kris K
  0  
  0  
#3
Options
Re:ACL Issue - Losing connection to dedicated server
2023-09-10 21:50:39

  @KJK You bet! How do I do that?

  0  
  0  
#4
Options
Re:ACL Issue - Losing connection to dedicated server
2023-09-11 00:19:50

  @ss1gohan13 

 

JetStream Switches User Guide, Configuring IP ACL Rule, Pages 799-800

Kris K
  0  
  0  
#5
Options
Re:ACL Issue - Losing connection to dedicated server
2023-09-11 03:41:06 - last edited 2023-09-11 03:44:26

Hi @ss1gohan13 

Thanks for posting in our business forum.

Wireshark can capture the packet and analyze the network traffic.

If you say that you experience something like the game hangs there, you cannot end the game because of ACL, then you should check if the source or destination IPs are not included in/excluded from ACL. Not sure how your game ends. Usually, if it is P2P, then the source and destination would usually stay the same.

I guess you should capture and find out why. How to capture packets using Wireshark on SMB router or switch

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#6
Options
Re:ACL Issue - Losing connection to dedicated server
2023-09-11 09:49:53

  @Clive_A 

 

Thank you for the reply. Also, apologies; I'm on mobile right now.

 

That link provided is for accessing the switch at the admin level of the switch GUI interface. I've got my switch tied into my omada controller. Is there another guide that references using the omada controller?

 

Also, side question, I noticed that there is a beta firmware for my gateway. I'm not advocating that I update to the beta version, but I noticed that ICMP type 13 packet had a fix put into place. Is it possible that is related to my timeout issue? If I understood what it is, it's a timestamp packet. 

  0  
  0  
#7
Options
Re:ACL Issue - Losing connection to dedicated server-Solution
2023-09-11 22:21:39 - last edited 2023-09-11 23:56:19

UPDATE FOR ALL:

So my dedicated game server I am running appears to do a DNS query at end of game to signal that the game is over (win or loss).

Since I was denying access to my internal pihole (and most likely whatever my primary DNS was one) the game wouldn't know that the game ended and the connection to the host would time out.

After I enabled access to my pihole internally (via port 53) I was able to get the server to responding properly.

 

Thank you all for your input and help.

 

EDIT:
 

To clarify, and to make it easier, I setup the ACL rule in the gateway, not the switch. The gateway ER7206, has proper directional ACL rules.

Recommended Solution
  2  
  2  
#8
Options

Information

Helpful: 1

Views: 661

Replies: 7

Tags

VLAN & Multi-Networks ACL
Solved
Related Articles
ACL Filtering in TLSG2428P and OC 200
112 0
 ACL - Allowing one port access a blocked VLAN
348 0
VLAN, ACL and security
52 0
[SOLVED] IoT ACL rules
504 0
Vlan Setup- Switch Fails to Assign IPs after ACL Binding
605 1
TL-SG3428 V2 ACL don’t work with official FW
852 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.