@DaKings I find that most of the Omada cloud controller interface is limiting, its certainly not developed in other areas as well.

Did you play already with flow controll settings on WAN port (if possible in Omada Mode) and on Switch Port ? 

  @Daniel2908 there is no flow control in the controller configuration utility.

  @KimcheeGUN 

The controller is the most current. The 8411 was at 1.00 and had a firmware update. I did that update after I got it on OMADA controller.

Seems odd there is not an option to change port settings, like duplex and speeds.

I'm not really affected or bothered by it. I'm only bringing it up, in hopes it'll be fixed in the future. It does not prevent the operation of the system. But if someone not as "skilled" is trying to get the 10G interface to connect to a 1G modem, they'll get upset quick.  All because of a simple setting that is not available .

  @Hank21 

You are correct. After firmware update, there is now an option to change the speed / duplex of the 10G ports.

This is my 2nd 8411 in my fleet, The first one is at my datacenter and I installed the most current firmware. Plus, at that site, I have dual 10G links right off main 10G switches. So never played with connecting to a 1G link. This one, my 2nd one, had the original firmware ver 1.00 ( or something like that ).I "played" in the web interface for a few days before connecting to my OMADA server.

Thanks!