Early Access EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on May 6th, 2024)- [Thread Closed]
This Article Applies to
EAP223(EU) V2.0
EAP225(US) V3.0
EAP225(EU) V3.20
EAP225(EU) V4.0
EAP225-Outdoor(US) V1.0
EAP225-Outdoor(EU) V3.0
EAP230-Wall(EU) V1.0
EAP235-Wall(EU/US) V1.0
EAP223(EU/US) V1.0
EAP245(US) V4.0
...
EAP610 v1.0 /v1.6 (EU/US/CA)
EAP610 v2.0 /v2.6 /v2.20 /v2.26 (EU/US/CA/JP/EG)
EAP610 v3.0 (EU/US/CA/JP/EG)
EAP613 v1.0 /v1.6 (EU/US/JP)
EAP615-Wall v1.0 /v1.6 (EU/US/CA/JP/EG)
EAP650-Wall v1.0 (EU/US)
EAP655-Wall v1.0 /v1.6 (EU/US/CA/JP)
EAP650 v1.0 /v1.6 /v1.20 /v1.26 (EU/US/CA/JP)
EAP653 v1.0 /v1.6 (EU/US/CA/JP)
EAP670 v1.0 /v1.6 /v1.20 /v1.26 (EU/US/CA/JP)
EAP620HD v2.0 (CA)
EAP620HD v2.0 /v2.6 /v2.8 (EU/US/JP)
EAP620HD v3.0 /v3.6 /v3.20 /v3.26 (EU/US/CA/JP/EG)
EAP610-Outdoor v1.0 /v1.6 /v1.20 /v1.26 (EU/US/CA/JP/EG)EAP650-Outdoor v1.0 /v1.6 (EU/US/CA/JP/EG)
EAP680 v1.0(EU)
EAP683 UR/LR v1.0/1.6(EU/US/CA/JP)
...
*More EAP Firmware for Omada SDN Controller v5.9 will be provided soon, stay tuned!
Release Notes
New Feature/Enhancement
1. Added support for the following new features which were added on Omada Controller v5.9.
- Added support for shared bandwidth while using the "SSID Rate Limit" feature.
- Added support for IPv6 ACL/URL Filtering/Guest Network.
- Added support for IPv6 dial-up/Client address acquisition/MLD to unicast.
- Added support for LLDP (Link Layer Discovery Protocol).
- Added support for the Network Check.
Select an Omada EAP and perform a ping or traceroute test to check the network connectivity.
- Added support for Packet Capture.
Select an Omada EAP, set the capture filter, and perform a packet capture for troubleshooting. Omada Controller uses TCP port 29815 to download the packets.
- Added support for Terminal.
Select an Omada device (EAP or Switch), open Terminal, and then you can execute CLI or Shell commands. Omada Controller uses TCP port 29816 to create remote control terminall sessions with the devices.
- Added support for downloading device info.
Omada Controller uses TCP port 29815 to receive the information from the devices. You can download a device's info by opening its Properties window, going to Config > Manage Device, and clicking Download. This feature helps to confirm the operational status of Omada devices and to perform troubleshooting.
- Added support for the "Lock To AP" feature.
Open a client's Properties window, go to Config, enable the function, and select one or multiple EAPs, then the client will be locked to the selected EAPs. This feature helps prevent a static client from roaming frequently between multiple EAPs.
- Added support for RADIUS username report.
When the SSID is configured with WPA-Enterprise authentication, the username used by the wireless client will be displayed in the 802.1X Authentication column of the Clients page.
2. Added support for some remaining new features on some EAP devices, which were added on controller v5.8 and earlier.
-
EAP610 v3, EAP613 v1
-
Added support for PPSK function in Controller mode.
-
Added support for Band Steering.
-
Added support for 802.11r fast roaming protocol.
-
Added support for Multiple RADIUS server.
-
-
EAP655-Wall v1
- Added support for PPSK function in Controller mode.
- Added support for 802.11r fast roaming protocol.
- Added support for Multiple RADIUS server.
- Added support for Multicast/Broadcast Management.
- EAP650 v1, EAP670 v1
- Added support for Multiple RADIUS server.
- Added support for Multicast/Broadcast Management.
- EAP615-Wall v1
- Added support for Band Steering.
- Added support for 802.11r fast roaming protocol.
- EAP650-Outdoor v1
- Added support for RE mode in Standalone. Please refer to FAQ3646 to learn how to configure it.
- EAP650-Wall v1, EAP610 v2
- Added support for PPSK function in Controller mode.
Bug Fixed
Fixed some issues that may occur on some EAP devices.
- EAP655-Wall v1
- Fixed abnormal IPv6 address acquisition for clients when enables Dynamic VLAN.
- EAP650 v1, EAP670 v1
- Fixed abnormal IPv6 address acquisition for clients when enables Dynamic VLAN.
- Fixed the disconnected issue caused by weather radar channels.
- EAP610 v3, EAP613 v1
- Fixed the issue that the Bonjour service may cause the AP to restart under certain circumstances.
- Fixed the issue that the Mesh AP may fail to return to the Connected state after a reboot in some cases.
- Fixed the issue that the SNMP may fail to get the correct number of clients with OID 1.3.6.1.4.1.11863.10.1.1.1.0.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
(2) You may follow the following guide to upgrade your Omada EAP devices. How to Upgrade/Downgrade Omada EAPs.
Firmware Download Link
EAP223 V2, EAP225 V3&V3.2, EAP225 V4, EAP225-Outdoor V1&V3 Pre-release
EAP230-Wall V1, EAP235-Wall V1 3.2.0_Build 20240103 Pre-release
EAP223 V1_1.3.0_Build 20240131 Pre-release
EAP610(EU)_V1_1.1.2 Build 20230922
EAP610(EU)_V2_1.1.4 Build 20230922
EAP610(EU)_V3_1.4.3 Build 20231215
EAP613(EU)_V1_1.4.3 Build 20231215
EAP615-Wall(EU)_V1_1.2.3 Build 20231215
EAP650-Wall(EU)_V1_1.1.4 Build 20231208
EAP655-Wall(EU)_V1_1.2.4 Build 20231208
EAP653(EU)_V1_1.0.9 Build 20230814
EAP650(EU)_V1_1.0.13 Build 20240131
EAP670(EU)_V1_1.0.12 Build 20230922
EAP620 HD(EU)_V2_1.1.2 Build 20230922
EAP620 HD(EU)_V3_1.2.3 Build 20230922
EAP610-Outdoor(EU)_V1_1.2.3 Build 20230922
EAP650-Outdoor(EU)_V1_1.1.3 Build 20240131
EAP680(EU)_v1_1.1.0_Build20240423(pre-release)
EAP683LR(EU_US_CA_JP)_v1_EAP683LR(US)_v1.6_1.1.0_Build20240412(pre-release)
EAP683UR(EU_US_CA_JP)_v1_EAP683UR(US)_v1.6_1.1.0_Build20240412(pre-release)
Additional Information
All feedback is welcome, including letting us know about successful device upgrades.
If somehow you encounter an issue during or after the EAP upgrade, it's suggested to contact us with the following info:
- Omada Controller version
- Device Firmware version with Build number (previous and current)
If your EAP gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.
How to use the Recovery Mode to recover the firmware for EAP
Update Log
July 5, 2024:
Official version EAP245 V4(US) 1.3.1 has been released.
Currently we only have US version, for other regions, please keep waiting for the update.
June 19, 2024:
Update to provide the Pre-Released version for the following EAPs:
EAP680 V1, EAP683 LR V1, EAP683 UR V1 Pre-release (Released on June 19th, 2024)
May 6, 2024:
Update to provide the Pre-Released version for the following EAPs:
EAP650-Wall V2_1.0.2, EAP650 V2_1.1.0 Pre-release (Released on May 6th, 2024)
Mar 13, 2024:
Update to provide the Pre-Released version for the following EAPs:
EAP223 V2, EAP225 V3&V3.2, EAP225 V4, EAP225-Outdoor V1&V3 (Pre-release version)
EAP230-Wall V1, EAP235-Wall V1 3.0.2_Build 20240103 (Pre-release version)(Pre-release version)
EAP223 V1_1.3.0_Build 20240131 (Pre-release version)(Pre-release version)
Feb 4th, 2024:
Update EAP650/EAP650-Outdoor beta version to official release.
EAP650v1: https://www.tp-link.com/support/download/eap650/v1/#Firmware
EAP650-Outdoorv1: https://www.tp-link.com/support/download/eap650-outdoor/v1/#Firmware
Jan 4th, 2024:
Update EAP610/EAP613/EAP615-Wall/ EAP655-Wall/ EAP650-Wall beta version to official release.
EAP610v3: https://www.tp-link.com/support/download/eap610/#Firmware
EAP613v1: https://www.tp-link.com/support/download/eap613/#Firmware
EAP615-Wallv1: https://www.tp-link.com/support/download/eap615-wall/#Firmware
EAP655-Wallv1: https://www.tp-link.com/support/download/eap655-wall/#Firmware
EAP650-Wallv1: https://www.tp-link.com/support/download/eap650-wall/#Firmware
Dec 18th, 2023:
Update EAP610/EAP620 HD/EAP610-Outdoor beta version to official release.
EAP610v1: https://www.tp-link.com/support/download/eap610/v1/#Firmware
EAP610v2: https://www.tp-link.com/support/download/eap610/v2/#Firmware
EAP620 HDv2: https://www.tp-link.com/support/download/eap620-hd/v2/#Firmware
EAP620 HDv3: https://www.tp-link.com/support/download/eap620-hd/v3/#Firmware
EAP610-Outdoorv1: https://www.tp-link.com/support/download/eap610-outdoor/v1/#Firmware
Nov 24th, 2023:
Update the EAP650-Wall v1 and EAP655-Wall v1 firmware, which fixed some issues.
-
Before
EAP650-WALL_V1_1.1.1_Build 20230814 (Beta)
EAP655-WALL_V1_1.2.0_Build 20230717 (Beta)
-
After
EAP650-WALL_V1_1.1.3_Build20231120 (Beta)
EAP655-WALL_V1_1.2.3_Build20231120 (Beta)
Nov 15th, 2023:
Update the EAP610 v3, EAP613 v1 and EAP615-Wall v1 firmware, which fixed some issues.
-
Before
EAP610_V3_1.4.1_Build 20230828 (Beta)
EAP613_V1_1.4.1_Build 20230828 (Beta)
EAP615-WALL_V1_1.2.0_Build 20230711 (Beta)
-
After
EAP610_V3_1.4.2_Build 20231011 (Beta)
EAP613_V1_1.4.2_Build 20231011 (Beta)
EAP615-WALL_V1_1.2.2_Build 20231018 (Beta)
Nov 8th, 2023:
Update EAP670 v1 beta version to official release.
EAP670v1: https://www.tp-link.com/support/download/eap670/v1/#Firmware
Sep 27th, 2023:
Update the EAP610 v3 and EAP613 v1 firmware, which fixed some issues.
-
Before
EAP610_V3_1.4.0_Build 20230718 (Beta)
EAP613_V1_1.4.0_Build 20230718 (Beta)
-
After
EAP610_V3_1.4.1_Build 20230828 (Beta)
EAP613_V1_1.4.1_Build 20230828 (Beta)
Aug 31st, 2023:
1) Add the following EAP firmware for early access.
EAP610(EU&US&CA)_V1_1.1.1_Build 20230814 (Beta)
EAP650-WALL(EU)_V1_1.1.1_Build 20230814 (Beta)
EAP653(EU&US&CA&JP)_V1_1.0.9 Build 20230814
EAP620HD(CA)_V2_1.1.1_Build 20230815 (Beta)
EAP620HD(EU&US&JP)_V2_1.1.1_Build 20230814 (Beta)
2) Update the following EAP firmware for early access.
EAP610(EU&US&CA&JP&EG)_V2_1.1.3_Build 20230814 (Beta)
EAP650(EU&US&CA&JP)_V1_1.0.10_Build 20230814 (Beta)
EAP620HD(EU&US&CA&JP&EG)_V3_1.2.2_Build 20230814 (Beta)
Aug 15th, 2023:
Add the following EAP firmware for early access.
EAP610_V2_1.1.2_Build 20230717 (Beta)
EAP620HD_V3_1.2.1_Build 20230717 (Beta)
EAP610-Outdoor_V1_1.2.1_Build 20230717 (Beta)
EAP650-Outdoor_V1_1.1.0_Build 20230811 (Beta)
Aug 7th, 2023:
Add the following EAP firmware for early access.
EAP615-Wall_V1_1.2.0_Build 20230711 (Beta)
Aug 2nd, 2023:
Post the following EAP firmware for early access.
EAP610_V3_1.4.0_Build 20230718 (Beta)
EAP613_V1_1.4.0_Build 20230718 (Beta)
EAP655-WALL_V1_1.2.0_Build 20230717 (Beta)
EAP650_V1_1.0.9_Build 20230702 (Beta)
EAP670_V1_1.0.11_Build 20230702 (Beta)
Recommended Threads
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Artur.Aragao well, it certainly didn't make PPSK work.
- Copy Link
- Report Inappropriate Content
This was quickly resolved with a new beta firmware for for EAP-655 wall (EU)
APs have been stable since, and PPSK with dynamic vlan is working great
Didn't see the new firmware pop up in the opening post, so I though I'd share so maybe it can be added for others.
The new (beta?) version I received: 1.2.90 Build 20230918 Rel. 63270
Affected EAPs: EAP655-Wall(EU) v1.0
YetOneMore wrote
Hi @Fae
Fae wrote
Hello @YetOneMore,
YetOneMore wrote
I'm running the beta firmware for the EAP655-Wall(EU) v1.0 ( 1.2.0 Build 20230717 Rel. 63070 ) on top of the ER7212PC v1.0 ( 1.1.0 Build 20230803 Rel.83667 ).
However, I noticed that with the beta firmware, after a few days the EAPs become disconnected.
The only mention in the log seems to be: "[Failed]Failed to readopt <eap-name-here> automatically. "
A powercycle (e.g. unplug them) resolves this, and they are readopted and reconfigured.
However, the wifi remains 'up' for the offending AP (ssid visible) but can't be connected to anymore (I'm using PPSK without Radius).
For now I've implemented a workaround by setting a nightly reboot for all APs, which seems to keep them alive.
Regarding the wifi cannot be connected issue, did you fix it by a second reboot on the EAP that was disconnected, or how did you sort it out finally?
To figure out the issue, I've created a support ticket via your registered email address and escalate to our support engineer for further investigation, the ticket ID is TKID230919422, please pay attention to this ticket email and respond to the support engineer for follow-up. Thanks!
I fixed it a couple of times by powercycling the EAP (unplug from the PoE and replug it).
After a few times, I implemented the nightly reboot schedule for all EAPs, which seems to prevent this issue from occuring.
Will do, thanks!
- Copy Link
- Report Inappropriate Content
I don't really use it, but I want to deepen my knowledge to apply an NPS in the future.
Despite having some knowledge, I want to understand everything that Omada and his assets can provide me. I know that it is a very interesting range to transform my Home Office and offices to which I intend to use the solution. So, as a reasonable knowledge of networks and still new to Omada, I haven't really had the pleasure of testing the wonders that this solution can provide, in its entirety. And I want to explore as much as I can.
Regarding RADIUS, is there any solution provided within the Omada assets or am I really forced to have an appropriate server for this?
Thank you for your attention.
- Copy Link
- Report Inappropriate Content
Is there any documentation that mentions how to implement PPSK without RADIUS from TP-LINK itself???
I would be very grateful if you could give me directions.
- Copy Link
- Report Inappropriate Content
Off the top of my head (not behind a pc right now)
You set the wireless security to wpa2 and ppsk without radius
You have to pair it with a ppsk profile (which has the passwords) , where you can also set a vlan. I'm not using the mac binding.
If you use the vlan, be sure to expose it on the switch port to the eap
If your ssid disappears, your eap doesn't support it (655wall pre update)
Then you connect your device(s) using the psk in the ppsk profile linked to the ssid.
Do you have any specific issues you're running into?
Artur.Aragao wrote
Is there any documentation that mentions how to implement PPSK without RADIUS from TP-LINK itself???
I would be very grateful if you could give me directions.
- Copy Link
- Report Inappropriate Content
Hello @YetOneMore，
Thanks for your valuable feedback and sharing!
Glad to hear that the Beta firmware solved your issue, if you have any further questions or concerns, please feel free to start a new thread for ask. Thank you!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I never got around to implementing it.
I'm delving deeper into networks with OMADA solutions.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Any update on a FW for EAP655-WALL that's more stable then the current release?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 74867
Replies: 275
Voters 1
