EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on May 6th, 2024)- [Thread Closed]

EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on May 6th, 2024)- [Thread Closed]

275 Reply
Re:EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 2nd, 2023)
2023-09-19 07:51:25 - last edited 2023-09-19 07:51:47

  @Hank21 

 

the last firmware (see image)

 

yesterday one AP was out of connection and stay on adopting 

Powering via POE switch 

with the original firmware I didn't notice this issue 

I don't know if the connection totally lost because I have 3 of them and two of them had the same issue sometimes 

 

  0  
  0  
#146
Options
Re:EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 2nd, 2023)
2023-09-20 02:14:28

Hi @Mariomark1541

 

Mariomark1541 wrote

yesterday one AP was out of connection and stay on adopting

 

Please Forget this AP and Adopt it again to check whether this issue still occurs.

 

Mariomark1541 wrote

I don't know if the connection totally lost because I have 3 of them and two of them had the same issue sometimes 

 

Do you mean you have upgraded all 3 EAP650s firmware to the 1.0.10_Build 20230814 (Beta) and 1 EAP has no issue but 2 EAPs both have?

Can you reproduce the issue steadily?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#147
Options
Re:EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 31st, 2023)
2023-09-20 02:18:38

  @Hank21, is there a timeline for releasing the beta firmware for the 660HD?

  1  
  1  
#148
Options
Re:EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 2nd, 2023)
2023-09-20 04:06:25

  @Hank21 

 

yes two of them had the same

isaue but one not

 

 

ans what I said one ap was adopting 

 

 

while he was just online
I couldn't get it banned anymore until I removed the UTP cable

and indeed never had any problems with the above with the previous software version on the eap stable version

  0  
  0  
#149
Options
Re:EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 31st, 2023)
2023-09-20 17:27:35 - last edited 2023-09-20 17:32:32

I updated some EAP655s from 1.0.2 to 1.2.0, and EAP650s from 1.0.6 to 1.0.10.

 

Everything was fine for about 8 hours, then I started experiencing some network issues. Checking the controller, two of my APs (one EAP655 and one EAP650) were no longer adopted, and adoption was repeatedly failing. I had to retry adoption multiple times before it succeeded.

 

I also noticed that my switch's (TL-SG3428XMP) CPU usage was at 90%, when it's usually around 30%

 

I also noticed an EXTREMELY LARGE amount of dropped packets and errors on my APs at this same time - here's the stats for just two of them at the time

 

I made various attempts to troubleshoot, including power cycling my switch (and APs as a result), but the errors only returned. Once I downgraded the firmware of all the APs, things returned to normal.

 

On a positive note, ipv6 traffic was working fine until this incident :)

  0  
  0  
#150
Options
Re:EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 31st, 2023)
2023-09-21 01:38:08 - last edited 2023-09-21 01:38:47

Hello @prooney

 

Sorry that we have no idea when the EAP660 HD firmware will be available, but will update this post once it's available.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#151
Options
Re:EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 2nd, 2023)
2023-09-21 01:45:01

Hi @Mariomark1541

 

Thanks for your reply. Please try Forgetting one EAP of two issues EAP650, and reset it, then re-adopt this EAP on the controller.

 

If it still doesn't help, please feel free to update here, and I will escalate this issue to the support engineer.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#152
Options
Re:EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 31st, 2023)
2023-09-21 02:39:04

Hello @jonahwh,

 

Please tell us the firmware version of your controller and the TL-SG3428XMP.

For the high CPU issue of the switch, please check whether there is a loop in your network, and check the physical connection.

 

jonahwh wrote

I also noticed an EXTREMELY LARGE amount of dropped packets and errors on my APs at this same time - here's the stats for just two of them at the time

 

May I confirm whether the dropped packets occur both on the 2.4GHz and 5GHz?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#153
Options
Re:EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 31st, 2023)
2023-09-21 05:38:22 - last edited 2023-09-21 05:39:06

  @Hank21 

 

> Please tell us the firmware version of your controller and the TL-SG3428XMP.

 

I'm currently running 5.9.31 as a software controller. The TL-SG3428XMP is running 3.0.3

 

> For the high CPU issue of the switch, please check whether there is a loop in your network, and check the physical connection.

 

There's no loops - and the high CPU resolved temporarily when disconnecting the bad-behaving APs and and permanently after I downgrade the AP firmware

 

> May I confirm whether the dropped packets occur both on the 2.4GHz and 5GHz?

 

It looks like it was on both, but much higher on the 2.4 GHz frequency, although that may just be due to the type of clients connected. It's also worth noting I was experiencing dropped packets on the wired connection from one of the EAP655's as well.

  0  
  0  
#154
Options
Re:EAP Beta Firmware for Omada SDN Controller v5.9 (Updated on Aug 31st, 2023)
2023-09-21 19:28:39

  @Hank21 Does the EAP655-Wall do RF Scan or is it my controller (ER7212PC) that lacks that capability? 

 

Currently running 1.2.0

  0  
  0  
#155
Options