The same address class is needed on the WAN and LAN side of the TP-Link ER605 TL-R605 router
Hello,
I need to install a router to create a barrier between the left and right sides of an existing LAN.
I can't change the addresses on either the right or the left side because I don't have access to the left side of the LAN and the computers on the right side have fixed IP addresses and the programs on them are configured in such a way that they will not work after changing these addresses.
Does anyone have an idea how to do this?
------- LEFT SIDE ------- ------- RIGHT SIDE -------
INTERNET
|
|
GATEWAY
|
|
192.168.1.X
|
__________|_____________________________
| | | | | | |
| | | | | | |
| | | | | | |
PC PC PC PC PC PC WAN
|
TP-Link ER605
|
LAN
|
|
|
192.168.1.X
|
|
___|___
| | |
| | |
| | |
PC PC PC
Can I possibly use two routers as below?:
------- LEFT SIDE ------- ------- RIGHT SIDE -------
INTERNET
|
|
GATEWAY
|
|
192.168.1.X
|
__________|_____________________________
| | | | | | |
| | | | | | |
| | | | | | |
PC PC PC PC PC PC WAN
|
TP-Link ER605
|
LAN
|
|
|
192.168.5.X
|
|
|
WAN
|
Another Router
|
LAN
|
|
192.168.1.X
|
|
___|___
| | |
| | |
| | |
PC PC PC