Beta Software ER605 V2_2.1.4_Build 20230727 Beta Firmware For Trial (Released on Aug 2nd, 2023)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This Article Applies to: ER605 v2 / v2.6_2.1.4_20230720 (Beta) | Fully adapted to Omada SDN Controller v5.11
Update as of Aug 2, 2023:
Thank you all for your valuable feedback on the ER605 2.1.4_20230720(Beta)!
Update the Beta firmware of ER605, which now includes the issue fixed that the ER605 V2 as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.
ER605_V2_2.1.4_Build20230727 (Beta)
Notes:
(1) The above firmware is applied to ER605 V2 and V2.60.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller 5.11.
Hello Everyone,
This release is mainly to fix some issues based on the ER605 V2 2.2.0 official firmware. Please check the following release notes for more about the fixes.
The Purpose of the Beta Firmware
We hope to offer you with a chance to experience the new features added in the Controller v5.11 in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release.
Release Notes
New Feature/Enhancement
1. Add ACL support for IPv6 data.
2. Add support for IPv6 RA (Router Advertisement) configuration for LAN.
3. Add support for configuring multiple IP addresses on the WAN port.
4. Add support for monitoring session limits in controller mode.
5. Add support for configuring the MSS (Maximum Segment Size) of WAN port.
6. Add support for Gateway Tools in Controller mode:
- Ping.
- Traceroute.
- Terminal.
7. Add support for the ability to download device info of Gateway in Controller mode.
8. Add support for Location Group in Gateway ACL.
9. Add support for white list of MAC filtering in Controller mode.
10. Add support for tagging same VLAN ID on different WAN port.
11. Increased security of communication between Gateway and Controller.
12. Add support for DNS cache, which can improve domain name resolution speed by handling recent address resolutions locally before sending request to Internet
13. Add support for DH 14 and DH 15 for PFS.
14. Add support for 0.0.0.0/0 IP range of local network when using IPsec IKEv2 for Client-to-Site VPN.
15. Add support for DDNS custom intervals (1~60 minutes).
16. Add support for link-local addresses or unique local addresses of IPv6 DNS on the LAN side.
17. Log Enhancements.
- Show the source IP address of TCP no-Flag /ping of death attacks.
- Show the log of link backup switching.
- Show the log of DDNS update.
- Logs can be saved when the device is down. You need to short press the reset button within 5s, and after releasing the reset button, the sys light will be on for 3 seconds to indicate that the downtime log is saved successfully.
Bug Fixed
1. Fix the bug that ICMP type 13 packets cannot be intercepted.
2. Fix the bug that VPN Client cannot access the other side through IPsec when the device act as a PPTP/L2TP/OpenVPN Server and also establishes IPsec VPN with other devices.
3. Fix the bug that VPN client cannot proxy Internet access when VPN IP Pool and LAN IP are in the same network segment.
4. Fix the bug of CPU abnormality caused by enabling more VLAN Interface.
5. Fix the bug of high latency in ISP Load in Controller mode.
6. Fix the bug of frequent reconnection with Omada Controller.
7. Fix the bug that the VLAN configuration of IPTV is affected by the VLAN configuration of WAN port in Controller mode.
8. Fix the bug that the device does not support proxy internet access as Wireguard VPN client.
9. Fix the bug that Port Forwarding does not take effect under multiple WAN ports.
10. Fixed the issue that the Router might become “DISCONNECTED” in the controller after upgrading to firmware 2.2.0. Reported Here.
11. Fixed the issue that new clients might lose Internet when bandwidth control is configured.
12. Fixed the issue that OpenVPN Server no longer works after upgrading to firmware 2.2.0. Reported Here.
13. Fixed the issue that Internet/DNS resolving might not work when using OpenVPN Connect App/Software to connect to the Router’s OpenVPN Server.
14. Fixed the issue that the ER605 V2 as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.
Beta Firmware Download
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
ER605_v2_2.1.4_Build 20230720 (Beta)
Notes:
(1) The above firmware is applied to ER605 V2 and V2.60.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller 5.11.
Update as of Aug 2, 2023:
Update the Beta firmware of ER605, which now includes the issue fixed that the ER605 V2 as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.
ER605_V2_2.1.4_Build20230727 (Beta)
Notes:
(1) The above firmware is applied to ER605 V2 and V2.60.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller 5.11.
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Clive_A OC200 v5.9.32. For the ER605, I've already downgraded to 2.1.2 so replicatong the issue is not possible. The "freeze and reboot" oftens randomly which prompted me to downgrade.
- Copy Link
- Report Inappropriate Content
That's a pity. If possible, can you export the related information for me? Specify the date when you experienced the issue. That would be helpful for us to locate the issue.
- Copy Link
- Report Inappropriate Content
Well I downgraded to 2.1.3 and it still reboots when I have a Bandwidth Profile....... so stupid!
Still drops the net when you change a port forward and if it doesn't reboot a bandwidth item is also drops the net. Can I suggest perhaps upgrading the Linux Core OS if you guys haven't and look to improve the background adjustments of things.
I don't know any other modems have DISCONNECT the internet to clients when changing a Port Forward. All these issues have remained since the start......
So I got a reboot on 2.1.4 .......... randomly........ (no accessing the modem just random reboots)........ and now on 2.1.3 changed a Bandwidth Profile......... boom reboot.
I want to be able to change settings NO RELATED TO WAN......... and have the connection stay on. Thats called BUSINESS/ENTERPRISE GRADE HARDWARE/SOFTWARE.
In no way should ANY of this REBOOT or DROP INTERNET unless your specifically changing a main item that would naturally effect it.
- Copy Link
- Report Inappropriate Content
Hi @MrHC1983
This is not the first time I ask if you can give us some details or a running log for us to locate the problem.
Can you let me know the controller version? From what you posted, you have tried 2.1.4 beta and 2.1.3 official, and on 2.1.4 you have a random reboot issue. And this persists on 2.1.3 after your downgrade it.
Apart from that, you have experience with port forwarding that can take down your Internet? On both 2.1.3 and 2.1.4? Can you be specific about this? The whole internet is down after you modify a single port forward rule?
- Copy Link
- Report Inappropriate Content
Hi @A-Shark
Not sure if you are interested in giving more details and exporting the running log when you use 2.1.4 beta?
I'd appreciate it if you can run the 2.1.4 beta and run the bandwidth and another test again. If this replicates, can you please export the running log for us and let me know more details?
- Copy Link
- Report Inappropriate Content
I have worked with TP Link on a few things since I bought this supplying logs, allowing remote access to my systems for them to look into things. So forgive me if I don't waste more hours....
The dropping of the internet when adding or changing any port forwards has existed since PURCHASE. Since the original firmware........ I do not need to be specific, this is what your techs in the labs are for. Hook it up, add a port forward within hmmm maybe 60 seconds the net drops. I can only imagine on Linux the IPTables reload causing dropped internet for whatever reason on your build of Linux.
The RANDOM REBOOT........... In 2.1.3 and 2.1.4 it would randomly reboot when adjusting "that I have noticed" Bandwidth settings as shown below, adding, removing, just editing the speed BOOM reboot (not always but alot of the time). Attached photo. In 2.1.4 it would randomly reboot without me doing anything. Whats REALLY ANNOYING about this is it takes like 5-10 MINUTES for the net to come back up. It takes FOREVER to boot, then adopts and configures half the time if your unlucky and it's messed up again it reboots AGAIN after configuring.
It's just not good.
1. Takes forever to start.
2. Drops internet on port forward changes (add/remove/edit)
3. It has no static IP custom DNS rules
4. Again the misalignment of Omada Hardware Releases vs ER605 (Routers In General).
5. The entire QoS system ........ is terrible. It should be not DEVIDING UP THE INTERNET. It should be setting custom rules to ensure a MINIMUM Guarentee.
6. The latency on atleast the ER605 is terrible once downloads are under way, you can only be using just over half your internet capacity and this thing has trouble with packets and latency for very picky things.
Look we all just want something that works........... thats why we are on the forum, stating what we are finding fault wise with these units. Missing features is one thing, random reboots, taking forever to start....... not functioning as intended (ie is 2023, managing bandwidth is a standard now).
I attached a screen shot. If you want the logs what do you want? The OC200 or the ER605 diagnostic logs........ I won't be posting them here as they clearly show the passwords in clear text!
- Copy Link
- Report Inappropriate Content
Hi @MrHC1983
I looked up the history. So you were complaining its boot time like half year ago. It's been optimized but the boot time can vary if you have configs on it. From my memory at the lab with this thing, I usually wait less than 5 minutes and it boots up.
You were facing a random reboot on V2.1.1? And now on V2.1.3 official and V2.1.4 beta. I am not sure if this is a false alarm like you reported half year ago.
Features you asking for, some are not guaranteed. They need to go through the evaluation phase. Not every single feature asked by people is gonna be implemented.
About what you said the misalignment. Our dev team is doing their best to add as many features as possible this year to the controller. Yes, as you said, some features are missing on router firmware. But you at least know that we have added them which also means that we are gonna update the firmware later to make them functional. Begin of this year, we collect feedback and requests as many as possible. Adding tons of features that have been asked for by customers. Getting some new routers published on markets. More Omada gateways and more firmware updates gotta be adapted to the new features, our dev team's working hard.
Some day in the future, we are gonna divide the product line to satisfy different needs of customers. At that time, you can probably expect some more features.
Regarding what you said about the latency high, can only use half of the Internet capacity, what do you mean? Are you using multi-WAN? If yes, we never guarantee you will have every download task load balanced. Why failing to achieve bandwidth aggregation of multiple WAN ports by Speedtest on SMB router
We have a load balance but the load balance is balancing the sessions. Some download tasks are creating a single session when it starts or very few sessions. If that's not balanced and it is not our fault. We balance but there is a mechanism to determine if that needs to be. If you have a better proposal for the load balance mechanism, I'd love to pass it on to the dev team.
If you download and your latency increases, that's also normal. When I download with a router at my house, with TP-Link brand or other gaming brands, I also see a surge in the latency as the download takes full speed and my latency to the web page or other servers increases. If you want to share more details about this, you can reply and include this in the email.
I am gonna create a case for you to escalate it and you will receive an email later on.
- Copy Link
- Report Inappropriate Content
Hi @MrHC1983
Thank you so much for taking the time to post the issue on TP-Link community!
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID230802748, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
Update as of Aug 2, 2023:
Thank you all for your valuable feedback on the ER605 2.1.4_20230720(Beta)!
Update the Beta firmware of ER605, which now includes the issue fixed that the ER605 V2 as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.
ER605_V2_2.1.4_Build20230727 (Beta)
Notes:
(1) The above firmware is applied to ER605 V2 and V2.60.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller 5.11.
- Copy Link
- Report Inappropriate Content
@Hank21 I'll try this. I just hope the freeze and reboot issue is fixed in this update. I'll give feedback a week from now.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 32547
Replies: 134
Voters 2
