IGMP on ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

IGMP on ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
IGMP on ER605
IGMP on ER605
2023-06-11 13:34:32
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.2 Build 20230210 Rel.62992

I'm trying to get TV-streaming to work over ER605.
In order to troubleshoot I'm using ssmping between two sessions on a machine on the LAN side.

ER605 with fixed WAN IP.

 

Listening session: ssmpingd -4

 

If sending with session: ssmping -4 <WAN IP>

I get:

ssmping joined (S,G) = (<WAN IP>,232.43.211.234)
pinging S from <LAN IP>
recv failed: Connection refused
errno=111

 

If sending with session: ssmping -4 <LAN IP>

ssmping joined (S,G) = (<LAN IP>,232.43.211.234)
pinging S from <LAN IP>
  unicast from <LAN IP>, seq=1 dist=0 time=0.083 ms
multicast from <LAN IP>, seq=1 dist=0 time=0.103 ms

 

IGMP Proxy is enabled with V3 on WAN. No VLANs.

 

Am I misunderstanding how this should work?

If not, how can I configure ER605 to allow this?

 

~Per

 

  0      
  0      
#1
Options
3 Reply
Re:IGMP on ER605
2023-06-16 16:13:58

So IGMP just does not work on a TP-Link Business class router?!?

 

  1  
  1  
#2
Options
Re:IGMP on ER605
2023-06-19 03:39:43

  @Knaldgas 

 

I am not sure if the IP address is correct you filled in the ssmping command.

Can you draw the exact network topology, including the IPs of all the machines?

Just striving to develop myself while helping others.
  0  
  0  
#3
Options
Re:IGMP on ER605
2023-06-19 05:54:30

  @Virgo 


       192.168.1.6                    External IP
  Host ──────────────────────── ER605 ────────────────── Internet
                    192.168.1.1

 

I started "ssmpingd -4" from one session on "Host", and the "ssmping" from another session on the same host.

"ssmping -4 192.168.1.6" works.

"ssmping -4 <External IP>" does not.

 

  0  
  0  
#4
Options