@Virgo Hello, thanks for your reply.

The OC200 is connected via POE from the switch with a short patch cable.  All the devices are new out of the box therefore I don't have any further history.  As far as affecting work, all the clients disappear from the client list when this happens.  I changed all the cables again yesterday with new cat 6 cables.  I only received the connection messge once over night therefore that's better but still a problem.

RP

@Virgo Here is the log info if helpful.  There is no log entry of it going down but only getting connected twice over night.  The earlier in the evening disconnects were when I switched the cables. 

  @rpaulpen There is also a regular heartbeat missed warming on the switch.  Nothing in the logs though.

  @Virgo Thanks for your feedback.  It's very frustrating.  What I do know is that hte switch does have quite a few heartbeat misses if I watch the screen.  I think when the switch comes back is what triggers the "connected message"